I got a Forged Eagle Crank forsale. I would like $500 for it. You can make a 408, 427 out of it. I forget what mains it has but I will get a part number and picture of box. If someone is real serious about it I will take it out of the box and take pictures of it.
Finally got to get the part number and call Eagle to discuss this crank. Its a 4340 forged crank, 4.00'' stroke, 3.00'' mains with 0.010 under main and rod journals. If you ever built one of these you usually have to either get them to take 0.010 off or order them this way. Internal balance and will support 1400 horsepower!!!
Well, it is a 4.000" stroke, 3.000" mains (.010" undersize so it is actually 2.990"), 2.100" rod journals (again, .010" under so it's actually 2.090") made for small block rods 6.200" long or longer. It is also intended for internal balance.
Finally got to get the part number and call Eagle to discuss this crank. Its a 4340 forged crank, 4.00'' stroke, 3.00'' mains with 0.010 under main and rod journals. If you ever built one of these you usually have to either get them to take 0.010 off or order them this way. Internal balance and will support 1400 horsepower!!!
Well, it is a 4.000" stroke, 3.000" mains (.010" undersize so it is actually 2.990"), 2.100" rod journals (again, .010" under so it's actually 2.090") made for small block rods 6.200" long or longer. It is also intended for internal balance.