• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

NITROUS INSTALL HELP NEEDED

  • Thread starter Thread starter lxwants12's
  • Start date Start date Mar 20, 2006

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 20, 2006
#1
  • Mar 20, 2006
  • #1
Im installing NX wet kit this weekend and need help with the wiring..im goin into a good saftey state of mind with it...im only spraying a max of 100 shot b/c i dont wanna risk my black..and i heard nx rates there hp at the wheels....anywayz..i got the msd retard....and rpm activated switch..the touch button one...can i set the nitrous up so that i just have a toggle inside the car and when i turn it on it only activates when the window switch rpms are in range?? or do i need a microswitch there too?? and how would i wire that?
ground of soloniods to chassis
power to rpm switch....then rpm switch to toggle..
toggle to power...
timing retard power wire spliced into nos soloniod power wire which goes to the rpm switch?

does that sound good?
 

sweet88gt

Member
Jun 25, 2005
334
0
16
Venice FL
Mar 20, 2006
#2
  • Mar 20, 2006
  • #2
Go to the MSD web site and they have good articles for how to wire up the msd activation.If I remember right the msd box will be in line of the nitrous solenoid so the msd box will only work when the toggle switch is on, and send power when you are in your rpm window. Just think of each item one at a time. Toggle switch sends power to the rpm window switch, then when you are at your desired rpm the window switch sends power to the msd box automatically retards timind and activates your solenoid for the nitrous hit. Other input from others would help. Anyways TTT for others to see.
 

lxwants12's

New Member
Sep 22, 2004
506
0
0
Mar 20, 2006
#3
  • Mar 20, 2006
  • #3
thanx for the advise about the msd site i was trying to say what u said but my wording was probly confusing
 
You must log in or register to reply here.

Similar threads

Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
983
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2026
Ryu
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
E
Terminator X Kill Switch install
  • Ethereal_Zer0
  • Feb 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2025
90sickfox
M
Need help!
  • Masonevans726
  • Dec 17, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
319
1996 - 2004 SN95 Mustang -General/Talk- Dec 17, 2025
Masonevans726
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?