Nitrous install on my 95...help with switches

[nathanralph]

I'm not sure where the fuel pressure safety switch goes on my 95. Anyone know? do i need a special adaptor?? Thanks in advance.

 

[stang_gt_1994]

Goes on the shreader valve on the fuel rail.

 

[nathanralph]

Goes on the shreader valve on the fuel rail.

hmm. I wonder if I got the wrong switch. It looks like this, but has no blue attachment:

http://www.raceperformanceparts.com/catalog/images/ffpandmanL.jpg

and the shrader valve doesnt appear to have a place to screw this in. I'll look again on it though, thanks. Anyone know if the 95 recquires an adaptor?

 

[Bad Saleen]

remove the shrader valve with a 9/16 wrench and screw your switch on the fuel rail

 

[nathanralph]

remove the shrader valve with a 9/16 wrench and screw your switch on the fuel rail

Wow. thanks! You guys have been a huge help!

 

[nathanralph]

Hmm. Another stupid question. I'm not so sure I know exaclty what the schrader valve is...anyone have a picture?

EDIT: I think i've found the schrader valve, but the fuel pressure safety switch is too big to screw in...do I need an adaptor?

 

[Bad Saleen]

you need a 1/16 to 1/8 adaptor and the shrader vavle is on the front of the fuel rail near the distributor and you will see a little plastic cap like a tire valve on it

thanx

 

[nathanralph]

You know how hard it is to find a 1/16th adaptor??? RIDICULOUS! Not a single auto store around here carries it. Not even the local nitrous place! I'm thinking about just rigging up my own connection...a little frustrated!

 

[94TURBO5 O]

I got mine from Home Depot in like their brass dept where they sell pipes and fittings.

 

[nathanralph]

I got mine from Home Depot in like their brass dept where they sell pipes and fittings.

I probably should have done that. Instead, I used JB Weld. If that can't handle 50psi or so of fuel pressure...well i'm screwed. Guess we'll see