I'm looking into going with a nitrous plate kit which fits in between the upper and lower of my intake. Some have told me it is overkill and others have told me to do it because it will be safer. Im running on a new motor so Im not planning on jetting it more than 100-150 range. Let me know what you think
Nitrous Plate Kit Overkill?
- Thread starter 87GT 306
- Start date
Maby overkill on who your racing. I think those plates are adjustable to a 300 shot and are better because they spray direct and closer to the intake ports, less chance for puddling. I am looking towards a similar setup.
Dbeck002
New Member
notchback
Founding Member
if your for spending the money thats the way to go.
and depends on how much you plan on spraying...you said 100-150
at 100....even dry kits are perfectly safe.
at 150 you want wet, and if your gonna be wet...might as well go plate , and forget that nozzle.
but thats my $.02
and depends on how much you plan on spraying...you said 100-150
at 100....even dry kits are perfectly safe.
at 150 you want wet, and if your gonna be wet...might as well go plate , and forget that nozzle.
but thats my $.02
bluevenom867
I will have images of molesting stuffed animals in
Get the plate.
Like the reasons above state and also it would have a more even nitrous/fuel distrobution,cylinder to cylinder,than the nozzle in the intake tracked.
Like the reasons above state and also it would have a more even nitrous/fuel distrobution,cylinder to cylinder,than the nozzle in the intake tracked.
Boostn
Founding Member
I am currently running only 75 shots on my big shot plate for holley systemax. I did that just for couple runs, but I am bumping up towards to 175 shots again. Staying with pump gas, 91-92 octane......
I got the innovate wideband o2 sensor to help me to see if its running too lean or not. I highly recommend it if pushing for extra power with nitrous. Nothing wrong with being safe.
I got the innovate wideband o2 sensor to help me to see if its running too lean or not. I highly recommend it if pushing for extra power with nitrous. Nothing wrong with being safe.
Boostn
Founding Member
I went only 125 shots last night and my best time was 11.981 sec @ 113.79mph. I am pretty happy about it.
I will be doing some testing and tuning for 175 shots for this coming friday. I hope to get 11.6 to 11.7 seconds
I will be doing some testing and tuning for 175 shots for this coming friday. I hope to get 11.6 to 11.7 seconds
silvrbulithed
New Member
I have been researching the same topic for my 90' LX. I found out that the stock style upper intakes (TF, EDL, GT40, Cobra, et cetera) are great at flowing air, but lousy at flowing an air/fuel/N20 mixture, thus all the puddling/falling out of suspension problems. Since I have a Peroformer RPN knockoff, I think I will go with this Edelbrock kit:
PN 70057. Unfortunately it does not come with a bottle or some other stuff, but I have a bottle, lines, and other hardware from a previous system, so I will be able to mix and match if need be.
PN 70057. Unfortunately it does not come with a bottle or some other stuff, but I have a bottle, lines, and other hardware from a previous system, so I will be able to mix and match if need be.
Boostn
Founding Member
cool, u'll have to let us know how well it works.
I am pretty happy with my big shot kit.
I want to know what kind of times and how many shots are you running with on what car set up you have.
I am pretty happy with my big shot kit.
I want to know what kind of times and how many shots are you running with on what car set up you have.
Similar threads
