• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Nitrous ????'s

  • Thread starter Thread starter 97v6Silver
  • Start date Start date Aug 10, 2004
  • 1
  • 2
  • 3
Next
1 of 3 Next Last

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 10, 2004
#1
  • Aug 10, 2004
  • #1
those that have no experaince with nitrous need not reply....

-other then a basic single stage kit what else will i need (no frills) to safely run a 75 shot?
-what is the best brand to get?
-where is the cheapest place to purchase a kit
-how many shots do you get out of a full bottle?
-how much does it cost to refill the bottle
-how long did it take you guys to install your kit
-where the best place to mount the control panel
-is nitrous 50 state legal?

thanks in advance for yalls help i think i'm pretty close to getting a setup pretty soon
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 10, 2004
#2
  • Aug 10, 2004
  • #2
ttt
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Aug 10, 2004
#3
  • Aug 10, 2004
  • #3
97v6Silver said:
those that have no experaince with nitrous need not reply....

-other then a basic single stage kit what else will i need (no frills) to safely run a 75 shot?You should get a bottle warmer, fuel pressure saftey switch and with a manual a rpm window switch
-what is the best brand to get?Nitrous Express is among the leaders
-where is the cheapest place to purchase a kitStill ebay on some items
-how many shots do you get out of a full bottle?Well it depends on the run, the bottle pressure and different other factors
-how much does it cost to refill the bottle In my area it is between 2.50-3.50 per pound
-how long did it take you guys to install your kit I am anal about the neatness and stuff so It took me longer than normal. But you can do it in a day if you wanted too.
-where the best place to mount the control panel I have a switch that runs everything. It arms the system, turns on the bottle heater and powers the WOT switch also in one.
-is nitrous 50 state legal? No, here In Georgia, you can have it in your car but it is illegal if the mainline is hooked up. So the mainline cannot be hooked up!

thanks in advance for yalls help i think i'm pretty close to getting a setup pretty soon
Click to expand...

Read my addin to your questions?
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 10, 2004
#4
  • Aug 10, 2004
  • #4
so i wont need new injectors, spark, plugs, comp tune?
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Aug 10, 2004
#5
  • Aug 10, 2004
  • #5
97v6Silver said:
so i wont need new injectors, spark, plugs, comp tune?
Click to expand...

Well, I did forget that one huh? You will need to go at least one to two steps colder in plugs.

YOU CANNOT USE PLATINUM WITH NITROUS, THEY WILL MELT!

I am running Autolite 103's right now. I am going to get a tune on the car to make sure that the a/f is right and get rid of my chip in n/a mode. That will just make it safer running with the nitrous.

Injectors, no you do not need to change them.
 

Ghostalker

Member
Jul 5, 2003
184
0
16
Danbury, CT
Aug 10, 2004
#6
  • Aug 10, 2004
  • #6
um... why will the platinum sprakeys melt and not the gold ones?
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 11, 2004
#7
  • Aug 11, 2004
  • #7
because nitrous makes more heat then gas when burned and platinum plugs are really hot all that heat = bye bye mr spark plug

do you need the bottle warmer and the window/safety switches?
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 11, 2004
#8
  • Aug 11, 2004
  • #8
i think i'ma order this system right here...

http://www.nitrousexpress.com/mainline/mainline_efi_customer.psd.pdf

i don't wanna go all out on it cus i'm going to tade the sixer in soon for a cobra but i still want to have a little fun with it before teh 6er is gone forever
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Aug 11, 2004
#9
  • Aug 11, 2004
  • #9
You do not have to have the warmer but it is useful to keep the psi to optimal bottle pressure between 900-1050 psi.

If you don't get that, yes you need the window switch with a manual.

Lets say you miss a shift hit the gas redline with nitrous may be bad! Like blown engine bad.

THey have a new one out that is digital and easier to setup than the one they sell.

It is by MSD and is worth the money (less than 100 bucks)

Oh and the ones that say NX window switch they are made by MSD, NX will tell you that!
 

ganador01

Founding Member
Jan 21, 2002
1,581
2
38
Dallas/Fort Worth, Texas
Aug 11, 2004
#10
  • Aug 11, 2004
  • #10
well...Being the self proclaimed nitrous guru of the 97 mustang(i decided 2 minutes ago while reading the post). I will give u some advice.

1. If u want it to work for cheap, here is what u need.

-a basic wet kit (nx 75 wet is what u should get )
-a nitrous bottle heater(turns on and off automatically)
-on bottle pressure gauge (to know if u even have any nitrous left)
- 1 step colder plugs (autolite 764's)
- a chip would be nice (fordchip)
- push button set up

You don't have to worry about spraying past redline if u miss a gear because you can't push the button if ur shifting the gears(get it?). That is the safety precaution.

Make sure u set it up so u use ur right hand to push the nitrous button. (if u use ur left hand to steer and do nitrous....well bad things could happen)

We did entire install including spark plugs in an hour and 45 minutes. (quite a simple install)

Btw, on the nozzle mounting position, use ur best judgement. I originally thought where i put mine was a bad spot but I have no come to believe it is actually better this way. (i mounted mine kind of far away from the tb). I believe this way is safer becuase you get a better mix and as long as u don't spray at idle u won't get puddling or anything like that.

Its not legal to have a working nitrous system on the street here in texas. You can have a nitrous system but u cannot have the line hooked up to the bottle. (i guess its the same as georgia)
 

94 3.8l stang

New Member
Apr 20, 2004
144
0
0
Bismarck, ND
Aug 11, 2004
#11
  • Aug 11, 2004
  • #11
You can have a working nitrous kit hooked up and ready to burn here. North Dakota sticks, YEAH BABY!!!!

Whats funny is the cops here would be like, WTF is that???. I'd just tell them its my O2 tank for when i start getting affixiated.
 

94 3.8l stang

New Member
Apr 20, 2004
144
0
0
Bismarck, ND
Aug 11, 2004
#12
  • Aug 11, 2004
  • #12
I'm still paying bills or I'd have one in already...
 

Ghostalker

Member
Jul 5, 2003
184
0
16
Danbury, CT
Aug 11, 2004
#13
  • Aug 11, 2004
  • #13
if i wasnterent (lol) 16 i would get one... and if i ever raced... (a la tracko)
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 12, 2004
#14
  • Aug 12, 2004
  • #14
ganador if you have a wet kit why would there be a nozzle in the intake wouldn't you just hook it up to the fuel rail?
 

ganador01

Founding Member
Jan 21, 2002
1,581
2
38
Dallas/Fort Worth, Texas
Aug 12, 2004
#15
  • Aug 12, 2004
  • #15
97v6Silver said:
ganador if you have a wet kit why would there be a nozzle in the intake wouldn't you just hook it up to the fuel rail?
Click to expand...
eh...no. This is what we call a shark nozzle system. If you hook it directly into the fuel rail its called direct port. (i might be mistaken on this one though. Im not sure if direct port is part of fuel rail or seperate taps.)

That system ur looking at...its a shark nozzle system...
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Aug 12, 2004
#16
  • Aug 12, 2004
  • #16
what do you mean by shark nozzle?
 

94 3.8l stang

New Member
Apr 20, 2004
144
0
0
Bismarck, ND
Aug 12, 2004
#17
  • Aug 12, 2004
  • #17
the nozzle is shaped like a shark fin. traditional nozzle were cylindrical. Direct port systems you drill and tap into your engine. It doesn't go on your fuel rail, although there is a piggy back nozzle that hooks into your existing injectors on your rail that like direct port, or AKA fogger system. I hope I explained that simply enough...
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Aug 13, 2004
#18
  • Aug 13, 2004
  • #18
It is also the name brand that NX has patented thier nozzle as the "Shark". That is really all it is.

Yes, it is a wet system and thus introducing fuel/nitrous into the intake after the MAF
 

ganador01

Founding Member
Jan 21, 2002
1,581
2
38
Dallas/Fort Worth, Texas
Aug 13, 2004
#19
  • Aug 13, 2004
  • #19
LsRedy2Kstang said:
It is also the name brand that NX has patented thier nozzle as the "Shark". That is really all it is.

Yes, it is a wet system and thus introducing fuel/nitrous into the intake after the MAF
Click to expand...
haha, my car will pwn urs...(i dont know where that came from...don't ask)
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Aug 13, 2004
#20
  • Aug 13, 2004
  • #20
Your all talk and no show!

So if we were to host a v6 drag day out and hope to have some big magazines there you coming?
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
273
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
136
Other Auto Tech May 31, 2026
LILCBRA
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
915
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?