No HP Gain

[tank_567]

I've gained alot from those mods

I've had my car dyno'd every time I installed a mod.(brother works at a dyno shop) I have a 98 gt vert.

When I first dyno'd at 184rwhp and 264rwtq stock. all done on a dyno jet

After cold air (tunable induction) 195rwhp 274rwtq
after h-pipe (bbk O/R) 207rwhp 284rwtq
after t/b and plenum (75mm both bbk) 218rwhp 291rwtq
after pulleys (march) 221rwhp 293rwtq
tune 233rwhp 305rwtq

1/4 times stock 15.1@90mph

after all mods plus 3.73 gears

[email protected]

ALSO I have pi heads being ported, pi intake, compcams cams and bbk long tubes to be installed. I got alot of this stuff from ebay used for under 1000 bucks, plus all of the other stuff I have already puts me at a grand total of $2700 bucks. 300hp maybe? way less than a blower.

 

[stangbanger01gt]

it appears you already have gears, so other than that there is no single mod you can do other than cams maybe that would give you a significant wide powerband sotp feel short of getting a supercharger. a tuner is not a bad idea at all though. when i tuned my car with my superchips tuner i did notice a little more low end torque in daily driving and gettin on it. besides it will help your motor deal w/ the extra air that is coming in by not letting it lean out (this is what i have heard) you should get a sct xcalibrator 2. these can be custom tuned to your setup.

 

[Scorcher2005]

$2700 bucks. 300hp maybe? way less than a blower.

You can find COMPLETE supercharger kits on ebay for less than $2000.

 

[tank_567]

what?

I got alot of this stuff from ebay used for under 1000 bucks,

Like I said I got heads cams and intake for that much. Plus I would never buy a used supercharger from ebay no matter what.

 

[deftsound]

lol old-bald-guy

 

[the98stang]

no, you just need a blower or some spray if you really wanna play!

Pretty sure a 03 would rape any blown 2v....

03-04 snake > 2v. I would kill for one of those cars. But, I do love my 2v

 

[cooper]

eehh im getting 288. rwhp on a mustang dyno with cai, 70mm tb , c-n-l plen, u-d pull , mac pro-chamber , stock cat back. 3.73 gears.........