• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

No instrument lights in 68 mustang

  • Thread starter Thread starter dpoltzer
  • Start date Start date Jun 8, 2006
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 8, 2006
#1
  • Jun 8, 2006
  • #1
Nedd some suggestions please:

I have no instrument lights in my cluster, however the turn signals, wipers and high beam indicator do work. I did check all (10-12?) bulbs when I had the cluster out of the dash and they do illuminate.

I am thinking that it could be the headlight switch (The headlights do turn on) but want to be sure before I spend the $$.

Thanks for any help on this.
 
6

67CoupeDriva

Member
Mar 15, 2004
165
0
16
South Carolina
Jun 8, 2006
#2
  • Jun 8, 2006
  • #2
check your ground to the instrument panel first
 
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 8, 2006
#3
  • Jun 8, 2006
  • #3
Ground wire

I did check the black ground wire that goes to the metal dash support and it is clean and tight!
 

Tim65GT

Active Member
Feb 24, 2004
1,149
2
39
West Texas
Jun 8, 2006
#4
  • Jun 8, 2006
  • #4
Make sure you vary the brightness by turning the light switch while performing the following checks:

Check for power at the Instr Pnl fuse (both sides). If good, look for a broken blue/red wire going to the dash connector.

If no voltage, check the blue/red wire out of the light switch. If good, look for a broken blue/red wire going to the fuse block.

If no power is coming out of the switch, then replace it.
 
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 8, 2006
#5
  • Jun 8, 2006
  • #5
Thanks for the suggestions, I will work on the system tonight.
 

sixtynine Mach

Member
Apr 18, 2004
53
0
6
California
Jun 8, 2006
#6
  • Jun 8, 2006
  • #6
Please let us know the outcome. I have a similar problem- replaced all the bulbs, cleaned the contacts, worked great for a few nights then presto, just stopped working again.
 

jcode68

Active Member
Jul 15, 2003
892
1
29
Massachussetts
Jun 16, 2006
#7
  • Jun 16, 2006
  • #7
Any update on this one? I have the same problem and would love to avoid chasing red herringds
 
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 16, 2006
#8
  • Jun 16, 2006
  • #8
Instrument lights

I have been traveling the past week so have not had a chance to work on the car. I will get to it the next few days and will report back. Thanks for your input.
 
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 21, 2006
#9
  • Jun 21, 2006
  • #9
Instrument Lights

OK, here is an updated on the lack of instrument lights:

The fuse position in the fuse block, that protects the instrument light circuit does not have power which is causing my problem. (My test light indicates no power to the circuit regardless of whether or not the key is on or off) I then put a jumper wire from another fuse position in the block to the "dead" fuse position, and "wella"! the instrument lights now work.

Now then, I am not sure why there is no power to the instrument light fuse position and more importantly, how to get power to this fuse/circuit. Every other fuse position within the fuse block does work correctly!

Any more suggestions??

Thanks,

Dave
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Jun 21, 2006
#10
  • Jun 21, 2006
  • #10
I believe the headlight switch feeds power to the fuse box on that circuit IIRC, so it's probably the headlight switch.
 
D

dpoltzer

New Member
Jun 8, 2006
6
0
0
Atlanta, GA
Jun 21, 2006
#11
  • Jun 21, 2006
  • #11
By the way, I did install a new headlight switch last night, yet still no power to just that one fuse position in the block. All of the other fuse positions are working.
 

68keyblr

20+ Year Stangneter
Mar 17, 2003
946
20
49
Arizona
Jun 21, 2006
#12
  • Jun 21, 2006
  • #12
dpoltzer said:
By the way, I did install a new headlight switch last night, yet still no power to just that one fuse position in the block. All of the other fuse positions are working.
Click to expand...

Yikes! Time to break out the test light and wiring diagrams. You're gonna have to trace wires to find where it's broken

I've been doing the same thing with my '88 GT - it's no fun but satisfying when you find the problem.

Good luck
 
You must log in or register to reply here.

Similar threads

8
Grounding issue?
  • 86SilverFox
  • May 16, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
158
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 31, 2026
86SilverFox
8
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
276
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
S
Electrical Foxbody Dash & Hazard lights not working
  • sjmcr
  • Jun 30, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
668
Fox 5.0 Mustang Tech Jul 27, 2025
Mindseye007
A
1966 Mustang coupe / Brake lights and left rear turn signal not working.
  • ArizonaRob1966
  • Nov 3, 2025
  • Classic Mustang Specific Tech
Replies
2
Views
363
Classic Mustang Specific Tech Dec 24, 2025
Mcmahst
T
2002 V6 3.8L Help Me
  • TheIncompetentMechanic
  • Apr 4, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3
Replies
50
Views
828
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
TheIncompetentMechanic
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?