No pulse to injectors 3/4 mspnp2 94 gt

Farmer Skippy · Jan 26, 2024

here is my dilemma, I have no injector pulse to #3/4 injectors. Noid light shows pulse on all other 6. I’ve checked all the wiring back to the ecu (megasquirt pnp2). I’ve jumped over from 2 other injectors and they fire fine. Is there a setting that I’m maybe missing in tuner studio? I’ve searched but ran out of hair to pull out.

Farmer Skippy · Jan 27, 2024

anybody have any thoughts? @hoopty5.0 maybe? Or should I just permanently jumper the ground signal from other injectors and call it a day…

Noobz347 · Jan 27, 2024

Let's move this to another forum. This could just as easily be an electronic or mechanical issue as it could be a tuner issue.

hoopty5.0 · Jan 28, 2024

Farmer Skippy said:
anybody have any thoughts? @hoopty5.0 maybe? Or should I just permanently jumper the ground signal from other injectors and call it a day…

man i apologize, but I havent messed with that kind of stuff in several years so I'm of no use here. If I were to guess, it could be a bad driver if you've tested everything else

Farmer Skippy · Jan 28, 2024

Noobz347 said:
Let's move this to another forum. This could just as easily be an electronic or mechanical issue as it could be a tuner issue.

Thanks, could be something simple hiding in plain sight or who knows…

Farmer Skippy · Jan 28, 2024

hoopty5.0 said:
man i apologize, but I havent messed with that kind of stuff in several years so I'm of no use here. If I were to guess, it could be a bad driver if you've tested everything else

No worries, thanks though.

AeroCoupe · Jan 28, 2024

Have you talked with the folks at DIYAutoTune?

Farmer Skippy · Jan 28, 2024

I have emailed them but not heard back yet. Hopefully I’ll hear something after the weekend.

KZGUNS · Jan 30, 2024

If you are on facebook like their page and post on there or one of the groups, they are pretty active over there

Farmer Skippy · Jan 30, 2024

Thanks all, I finally sorted it out. Between the great folks at Summit and DIY auto it turns out I ordered/was sent the wrong ecu. Summit had it listed to work with my car but actually the wiring is different in the megasquirt for the 94/95 gt then the 86-93. It was listed as a 86-95 fit which was incorrect. All sorted out by the folks at diy and remedied by summit. Replacement on its way.

Noobz347 · Jan 30, 2024

Sweet. Let us in on the update!

Farmer Skippy · Feb 16, 2024

Alright, so here is the update…correct ecu showed up, installed, loaded the tune and bam, fired right up. Was going to get a decent tune going and load it up here for a review but bonus part was my new Vortech v3 si showed up the same day. Long Storry short, little whir whir whine device is now bolted on and fired it up last night. Will sort out a few settings and upload a tune here to see what anyone thinks. Next will be a drive when the white stuff (snow) and gravel is off the road.

Farmer Skippy · Feb 16, 2024

No pulse to injectors 3/4 mspnp2 94 gt

Farmer Skippy

Member

Attachments

Farmer Skippy

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

hoopty5.0

mechanicus terribilis

Farmer Skippy

Member

Farmer Skippy

Member

AeroCoupe

lube between the nut and the face. I know my lubes

Farmer Skippy

Member

KZGUNS

I can swing up to 11”

Farmer Skippy

Member

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor

Farmer Skippy

Member

Farmer Skippy

Member

Similar threads

No pulse to injectors 3/4 mspnp2 94 gt

Member

Attachments

Member

Stangnet Facilities Maint Tech... Er... Janitor

mechanicus terribilis

Member

Member

lube between the nut and the face. I know my lubes

Member

I can swing up to 11”

Member

Stangnet Facilities Maint Tech... Er... Janitor

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency