I have a boss 302 block with tfs-r intake and boss 302 valve covers. the driver side vc opening is towards the front of car...the passenger side is towards the firewall. I will have a vortech power cooler so the pass side must be towards the firewall...the driver side vc opening is directly under the intake and there is not enough clearance for a baffle or filler tube. I already have a large plenum spacer...attached is the pic to show the issue....what are my option? remember i have to install power cooler so pass vc opening must be in back. Only solution i might of heard was an oil catch can with 90 degree fitting on both VC running to the catch can. please advise