• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

noobie question on heads/cams

  • Thread starter Thread starter DUKE
  • Start date Start date May 31, 2006
D

DUKE

Founding Member
Jan 27, 2002
52
0
0
Hampton, Va
May 31, 2006
#1
  • May 31, 2006
  • #1
I have a 2000 GT and was interested in purchasing MPH 2.5 heads and VT stage 1 cams. If I ordered these together, would they come assembled together or not. Also I would have to take my long tubes off to do this, so do you think it would be worth all the work to do this? Thanks.
 

lover

Founding Member
Oct 8, 2001
264
0
0
Atlanta, GA
May 31, 2006
#2
  • May 31, 2006
  • #2
I don't think they come assembled togther, unless you bought the block. You should plan a little road trip and have them put it in your car for you. I know or read about guys driving all the way from Texas and other states that go there to get work done. I should be ashamed because I only stay about 30 minutes away and I haven't been there yet.. But that's if you can take off work.

The head and cam swap should definitely be worth it. Other than a power adder or a gear change, upgrading the heads and cams are your next best power increaser. But I don't think companies make aftermarket heads for the 4.6, but companies just port the stock PI heads. So if you know someone who ports heads, just have your stock heads ported instead of buying some more. I don't know how much power you want to make, but if you're staying n/a your stock bottom is good. But adding a power adder, which you probably will later on, cause let's face it, in today's world of 600+HP EVOs, 500HP Subarus, Z06s, and cammed Camaros. Head and cam swaps on Mustangs ain't gonna cut the mustartd,it would be wise to beef up that stock bottom while you're upgrading. Then you can slap on a blower and turn up the boost without fear of something breaking on you...But good luck
 

DropTopPony

Noob Slayer
Founding Member
Aug 13, 2002
2,570
3
48
south jersey
May 31, 2006
#3
  • May 31, 2006
  • #3
i'm sure MPH will bolt the cams in for you but they may charge you a few dollars labor....call them and ask.It will make shipping easier with them installed. Rhonda will tell you.
Yes you will have to unbolt your headers and yes it will be worth it.
 

BooWFO

New Member
May 10, 2005
991
0
0
Louisville, KY
May 31, 2006
#4
  • May 31, 2006
  • #4
0k I gotta ask why your thinking stg 1 cams with ported heads? Why not a slightly bigger cam. a stg2 or maybe the comp 270's? Are you worried about loss of lowend?
 
M

Mustanggt108

New Member
Sep 23, 2005
221
0
0
May 31, 2006
#5
  • May 31, 2006
  • #5
BooWFO said:
0k I gotta ask why your thinking stg 1 cams with ported heads? Why not a slightly bigger cam. a stg2 or maybe the comp 270's? Are you worried about loss of lowend?
Click to expand...

yes , get stage 2 cams .and if your worried about loss of lowend , then just slap on some good gears and your all set. And yes its worth it IMO
 
You must log in or register to reply here.

Similar threads

A
Old Holley head identification???
  • Ar15cobra
  • Jan 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
171
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 27, 2026
AeroCoupe
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
309
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
S
Engine 2003 Mach 1 Automatic Upgrades assistance
  • SJK1417M1AT
  • Sep 25, 2025
  • SN95 4.6L Mustang Tech
Replies
3
Views
295
SN95 4.6L Mustang Tech Dec 21, 2025
01SVTvertt
0
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
792
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
859
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?