• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

NOS sniper system

  • Thread starter Thread starter Modular2v
  • Start date Start date Jan 25, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#1
  • Jan 25, 2006
  • #1
For the price i figured i couldnt go wrong on my carbed 331......has anyone had any experience with this system?
 

cjman15

Banned
Apr 15, 2004
1,009
0
0
Fairfield, PA
Jan 25, 2006
#2
  • Jan 25, 2006
  • #2
Is that the system with the little small bottle that you can like hide?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 25, 2006
#3
  • Jan 25, 2006
  • #3
cjman15 said:
Is that the system with the little small bottle that you can like hide?
Click to expand...
No the sniper has a 10lb bottle. I believe sneaky pete makes a small bottle kit. I run this kit ih as worked well for me. the only complaint i have about it is the solinoids are on the small side. i'm not sure that they have the size to flow 150hp jets. i say this because with 100hp jets installed i run as quick as with 150hp jets installed. mind you i have never tuned the nitrous system or my car for that matter.
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Jan 25, 2006
#4
  • Jan 25, 2006
  • #4
Think about where your numbers would be if you had a tune!
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 25, 2006
#5
  • Jan 25, 2006
  • #5
fiveohGT said:
Think about where your numbers would be if you had a tune!
Click to expand...
I do believe me i do. Just ordered a innovative LM-1 kit so i can tune my carb myself. Can't wait to see what kinda time i can pick-up with tuning.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#6
  • Jan 25, 2006
  • #6
86bluecobra said:
I do believe me i do. Just ordered a innovative LM-1 kit so i can tune my carb myself. Can't wait to see what kinda time i can pick-up with tuning.
Click to expand...
so you think i could turn out some 11s if i had a tuned carb? what is this lm-1 kit you speak of?
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#7
  • Jan 25, 2006
  • #7
bump
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Jan 25, 2006
#8
  • Jan 25, 2006
  • #8
Its just a standard nitrous kit, with a regular commercial sytle bottle.

I believe the solinoids are the same as a power shot,just labeled differantly.

In your position,I would just get the Cheater kit (100-250hp).
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#9
  • Jan 25, 2006
  • #9
bluevenom867 said:
Its just a standard nitrous kit, with a regular commercial sytle bottle.

I believe the solinoids are the same as a power shot,just labeled differantly.

In your position,I would just get the Cheater kit (100-250hp).
Click to expand...
what makes the cheater so much better?
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Jan 25, 2006
#10
  • Jan 25, 2006
  • #10
Modular2v said:
what makes the cheater so much better?
Click to expand...

Larger solinoids....and I believe it might come with the -06AN line,but Im not positive.Either way,the -04AN will support the 250hp the cheater can make,and if you get the cheater with the stainless braided hose from the noids to the plate (-03AN,or there -04AN/-03AN),its much easier to change jets.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#11
  • Jan 25, 2006
  • #11
bluevenom867 said:
Larger solinoids....and I believe it might come with the -06AN line,but Im not positive.Either way,the -04AN will support the 250hp the cheater can make,and if you get the cheater with the stainless braided hose from the noids to the plate (-03AN,or there -04AN/-03AN),its much easier to change jets.
Click to expand...
is it worth the extra 200$....im a college student on a budget. Do you think my internals would be up for a 200 shot? I have forged probe flat tops, forged eagle rods and a nodular scat crank
 
F

fiveohGT

New Member
Jun 22, 2004
353
1
0
Fairfax Virginia
Jan 25, 2006
#12
  • Jan 25, 2006
  • #12
What compression are you at?

It's all in the tune. If you arn't careful you could destroy everything.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 25, 2006
#13
  • Jan 25, 2006
  • #13
i dont know my compression im guessing its close to 9.5:1....im using stock unmilled head with a stock decked block and probe flat tops.....when i put heads on it will raise the compression obviously
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 26, 2006
#14
  • Jan 26, 2006
  • #14
nitrous likes compression. blue venom has some nice links on how to tune nitrous systems. the sniper kit has worked well for me. my bro in-law has one and so does his brother which of couse is my other bro in-law. we all like them. the lm-1 kit is a air fuel ratio computer. it is going to allow me to tune my carb by myself with out need of a dyno. well atleast get me closer to a dyno tune then i am. the newest 5.0L mustang mag has a neat article about a new product that allows you to adjust the pressure of your nitrous bottle (i.e. if bottle presure is 1200 because of sun and you want to only run 1050 to the solinoid you can adjust it to that). bluevenom has a link to tuning the fuel side of the nitrous system. this will give your engine the proper a/f ratio on nos and pick up ponies.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 26, 2006
#15
  • Jan 26, 2006
  • #15
yes i know nitrous likes compression.....thats why im going to be getting new heads soon
 

87_stang

Member
Dec 12, 2005
131
0
16
Tonganoxie, KS
Jan 26, 2006
#16
  • Jan 26, 2006
  • #16
86blue cobra-Where did you find the LM-1 kit and what do they run$? Sounds like something I might invest in.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 26, 2006
#17
  • Jan 26, 2006
  • #17
oh sorry i guess i was stating the obvious. i know 1 reason not to buy the sniper kit. It comes with plastic bottle mounts. which i believe are not allowed at most tracks. take that for whatever it is worth to you.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jan 26, 2006
#18
  • Jan 26, 2006
  • #18
87_stang said:
86blue cobra-Where did you find the LM-1 kit and what do they run$? Sounds like something I might invest in.
Click to expand...
http://forums.stangnet.com/showthread.php?t=609627
http://www.innovatemotorsports.com/xcart/customer/home.php?cat=248
http://www.innovatemotorsports.com/resources/carb-tuning-hero.php
http://www.innovatemotorsports.com/resources/efi-central.php
a few links on the subject. in the forum link there a guy on second page gives a link and cupon code for getting one cheaper then everyone else offers them for.
 

bluevenom867

I will have images of molesting stuffed animals in
Dec 15, 2003
1,704
1
0
St.Petersburg,FL
Jan 26, 2006
#19
  • Jan 26, 2006
  • #19
Heres the link to the tuning page I sent 86bluecobra

http://www.dragstuff.com/techarticles/reading-spark-plugs.html

Also check here,and look under general nitrous discussion

http://www.americandragracing.com/xmb1/index.php?p=showindex
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Jan 26, 2006
#20
  • Jan 26, 2006
  • #20
86bluecobra said:
oh sorry i guess i was stating the obvious. i know 1 reason not to buy the sniper kit. It comes with plastic bottle mounts. which i believe are not allowed at most tracks. take that for whatever it is worth to you.
Click to expand...
our local track just basically has you pop ur hood and shut it for inspections but world ford challenge might be a different story.....oh well i guess i could just buy some metal ones, no big deal
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

A
Old Holley head identification???
  • Ar15cobra
  • Jan 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
147
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 27, 2026
AeroCoupe
C
96-984.6 COBRA MOTOR
  • COWBOY2.3
  • Feb 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
150
1996 - 2004 SN95 Mustang -General/Talk- Feb 15, 2026
COWBOY2.3
C
P
Engine Help 331 stroker
  • pdmount
  • Feb 19, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
252
Fox 5.0 Mustang Tech Feb 21, 2026
pdmount
P
Fuel SN95.0 fuel system
  • RedFury5.0
  • Apr 22, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
297
Fox 5.0 Mustang Tech Apr 22, 2025
AeroCoupe
Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
96
Fox 5.0 Mustang Tech Monday at 8:38 AM
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?