o ring'd head question

[Modular2v]

What all will i have to modify to run a set of o ring'd heads? Or is is just simply finding steel rings to put in the slots?

 

[Daggar]

Steel rings or a set of gaskets with the wire already in them.

-or-

I think you can run MLS gaskets with those just like they were not o-ringed at all. Double check this last suggestion with some other folks though. It's something that I've "heard" of being done but not seen.

 

[Modular2v]

Steel rings or a set of gaskets with the wire already in them.

-or-

I think you can run MLS gaskets with those just like they were not o-ringed at all. Double check this last suggestion with some other folks though. It's something that I've "heard" of being done but not seen.

Thanks dagger. . . i was just making sure i wasnt buying a set of heads that i would had to have had the block machined in order to work with them

 

[TC93]

Depends on what the heads were machined for, either the wire or for the o-ringed gaskets. Just had a set of heads machned for o-ringed gaskets(fel pro 1006). Machine work is different between using o-ringed gaskets or using the ring in the head or block with copper gaskets.

 

[Modular2v]

Depends on what the heads were machined for, either the wire or for the o-ringed gaskets. Just had a set of heads machned for o-ringed gaskets(fel pro 1006). Machine work is different between using o-ringed gaskets or using the ring in the head or block with copper gaskets.

They are the trick flow o ring'd heads

 

[Sicarius428]

I am running TFS o-ringed heads and nothing needed to be done to the block. The gaskets are what has the o-ring. You should be good.
Kevin

 

[Modular2v]

I am running TFS o-ringed heads and nothing needed to be done to the block. The gaskets are what has the o-ring. You should be good.
Kevin

Thanks for easing my mind guys

 

[Modular2v]

I am running TFS o-ringed heads and nothing needed to be done to the block. The gaskets are what has the o-ring. You should be good.
Kevin

do you mind me asking what gaskets you run? I need something that will stand up to the nitrous

 

[Sicarius428]

I just bought the gasket kit for the TFS o-ringed heads from summit.
http://store.summitracing.com/partd...908331+4294924929+4294840126+115&autoview=sku
There is another gasket set for the high ports.
Kevin