Also, I found this article with reference to adding some leads from the trans harness and fuel pump relay. Have you seen this and any chance you may know if it's accurate?
Also, I found this article with reference to adding some leads from the trans harness and fuel pump relay. Have you seen this and any chance you may know if it's accurate?
Yes, but about half way down he talks about splicing into the fuel pump relay and pinning it to pin 19 and then putting jumpers from the org/yel and grn/wht wires in the trans harness to pins 6 and 3 respectively to prevent stalling problems.
I was preparing to do this, as I don't want to have to take the seats/carpet out again, but am not sure if it's necessary or incorrect advice.
Again, thanks for any guidance, it's truly appreciated.