Information for 4.6 owners. The shaft that the oil filter screws onto can come lose and cause a substantual oil leak. If this happens take the oil filter off and get a bolt that has a 1/2 inch head and is about 1 1/2 inch long and abot 1 inch of threads. Put nut on the threads all the way up. This can be used to tighten the oil filter shaft which has a large hex machined inside.
This is on the peice that has the oil pressure sender, the oil filter and lower rad hose. Hope this helps someone.
This is on the peice that has the oil pressure sender, the oil filter and lower rad hose. Hope this helps someone.