Oil seperator steeda, husky

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

May 3, 2008

#1

• May 3, 2008

• #1

I just installed steeda oil seperator and i am using it with synthetic oil. Bottle says avoid synthetic oil but it is all good. Don't believe everything you read. there is not enough pressure in PCV vacume to break the bottle. AND for those using straight fittings, use 90* fittings. they seem to trap oil better. Just letting you all know.

By the way Home depot has almost same separator for $11.99 and fittings for 2 bucks each. Brand is HUSKY (made in china but very well built)

Search the tread on stang net before you buy anything. LOL I over paid!!!

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

May 3, 2008

#2

• May 3, 2008

• #2

i made mine @ home depot for ~15

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

May 3, 2008

#3

• May 3, 2008

• #3

Where do you mount yours? I didn't want to drill anything so mine is holding with wire ties at the moment. can you post some pics? thanks

 

95strokerPSU

Member

Jul 29, 2004

986

1

19

Sacramento from Philly

May 3, 2008

#4

• May 3, 2008

• #4

Campbell filter

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 3, 2008

#5

• May 3, 2008

• #5

You can see mine on the pass side opposite battery...same cheap parts
RC

 

chaos254

Founding Member

Jul 27, 2002

467

3

29

NJ

May 3, 2008

#6

• May 3, 2008

• #6

mine also is from home depot. I broke my element off(white piece in the filter) because I believe that is what gets clogged after time. I havent had any problems running synthetic with it.

 

FlyBy763

Member

Apr 23, 2004

439

0

17

Palm Bay, FL

May 3, 2008

#7

• May 3, 2008

• #7

The Husky one is probably made my Campbell-Hausfeld anyway...most of their air tools/compressors are.

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

May 4, 2008

#8

• May 4, 2008

• #8

hollywoodstang said:

Where do you mount yours? I didn't want to drill anything so mine is holding with wire ties at the moment. can you post some pics? thanks

Click to expand...

no pics but its zip tied up behind the intake on the a/c lines i belive

 

hollywoodstang

Active Member

May 23, 2006

1,095

2

36

May 4, 2008

#9

• May 4, 2008

• #9

RC has his on the fender wall...What the hell?! you ran your hose all the way there to the back of the intake to PCV? I also have strut bar so i can't put it like the first pic...But i do "Need" to bolt this sucker down some where...

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 4, 2008

#10

• May 4, 2008

• #10

hollywoodstang said:

RC has his on the fender wall...What the hell?! you ran your hose all the way there to the back of the intake to PCV? I also have strut bar so i can't put it like the first pic...But i do "Need" to bolt this sucker down some where...

Click to expand...

Actually mine is connected to the oil filler neck. the other end is connect to the power pipe. A shop put the hose from the filler neck down to the bottom of the engine bay to relieve pressure. The hose was sucking in air that was unmetered, so I connected it to the power pipe AFTER the air being sucked in was metered. Works well so far.

RC

 

Venom351R

Founding Member

Apr 27, 2002

4,548

41

98

MAINE

May 4, 2008

#11

• May 4, 2008

• #11

I cant believe steeda charges $70 for that thing.


RC- Where did you get your pullies from?

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 4, 2008

#12

• May 4, 2008

• #12

Redline_351R said:

I cant believe steeda charges $70 for that thing.


RC- Where did you get your pullies from?

Click to expand...

Mike Wazee from Corral

We used to call them "Wazee Pullies"

I havent seen him around in awhile.

Thanks
RC

 

94opalgt

Member

May 5, 2005

358

0

17

AKRON,OHIO

May 4, 2008

#13

• May 4, 2008

• #13

94GTLaserRC said:

Mike Wazee from Corral

We used to call them "Wazee Pullies"

I havent seen him around in awhile.

Thanks
RC

Click to expand...

he has a website, wazeepullies.com.