• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Ok folks paint question

  • Thread starter Thread starter pomag50
  • Start date Start date Jul 14, 2007

pomag50

New Member
Jul 10, 2007
32
0
0
San Diego
Jul 14, 2007
#1
  • Jul 14, 2007
  • #1
I saw the thread that shows how to paint your car yourself for $50. I was wondering how i could apply that technique to get a matte finish on my car. Every paint place i have talked to in town says that a matte finish is way more expensive than a standard finish. any ideas out there?

oh yeah here is site to paint your car yourself::

http://bryanswebpage.com/50DollarPaint/
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Jul 14, 2007
#2
  • Jul 14, 2007
  • #2
We sell paint similar to that in a satin finish. Not a matte though. Ill try and find you a product name Monday.

And Im pretty sure gloss would be more expensive.
 

Blackened302

Active Member
Jul 21, 2005
1,439
0
36
South TX
Jul 14, 2007
#3
  • Jul 14, 2007
  • #3
from what i've been told, if you want a matte finish, you need to use a matte-type paint.

a guy at Napa told me when i was buying the paint for my hood. i wanted to do the matte finish in the center and thought i could just not clear that part, but he said it would wear off if i didn't use that specific type of paint.

not sure if he was correct, but something to consider.
 
J

Juggalo95

New Member
May 27, 2007
151
0
0
Jul 14, 2007
#4
  • Jul 14, 2007
  • #4
USe that DP50 or whatever it is...its a flat black color...single stage(ie like shooting sealer or primer)..Its kinda spendy I think for what it is but still cheaper than a good base/clear system...if you really only want the paint on for a few years just d/a you car really well with some 400 or 500 grit or wetsand..and lay some black sealer over you factory paint. That would be pretty cheap

Oh yeh and aerosol crap will wear off...just shoot it from a real spray gun...make sure you have enough scfm and use a smaller tip gun 1.4 to keep it from gettinga orange peel to it....IMO id only do a flat black set up if my car was wrecked and had multi colored panels...
 
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Paint and Body Chythar's 94 Cobra Clone Paint thread
  • Chythar
  • Jan 16, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 25, 2023
85GTStangGuy
New daily driver help needed.....not a mustang but mustang drivetrain.
  • Wayne Waldrep
  • Jun 17, 2024
  • Other Auto Tech
  • 3 4 5
Replies
80
Views
7K
Other Auto Tech Jul 28, 2024
manicmechanic007
Paint and Body Chythar's 94 Cobra Clone Paint thread
  • Chythar
  • Aug 16, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 16, 2021
Chythar
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?