ok, so what is EVERY part i will need to do the H/C swap

[1994Vib.RedGT]

Ok so I am trying to compile a FINAL hardware list for my upcoming head, cam, pulley, injector, AFPR, & MAF. swap. I need to know every nut, bolt, gasket, bearing, whatever! EVERYTHING. So far I know I need

*the heads
*new head gasket kit
*head bolts
*new stem seals
*touch up valves
*camshaft
*camshaft grease
*fuel pressure guage for schrader valve
*and of course the tools required
*new spark plugs
*so now please tell me what other parts am I going to need, Im sure Im forgetting something

 

[legalize420]

i used this http://users3.ev1.net/~voodoostang/headsswap.htm

 

[final5-0]

Here is a tip for you to keep from making such a big mess.

Remove the plugs to the water jackets on each side of the block BEFORE you pull the head. Then replace them with 99 cent twist valves from the auto supply house.

Your Welcome

btw ...... Hope you have a lot of fun

Grady

 

[RIO5.0]

What he said...I removed em afterwards as I never realized we had em..