? on C&L MAF

[gcwh02]

Ok, here is the deal. I use to have the C&L 76mm installed calibrated with my 24lb inj. I swapped the 24's back to 19 and put stock MAF on. Right now I am running a 70mm TB with my stock MAF. Is that bad? I dont want to put out the money for a calibrated 19lb C&L b/c of my future plans. I heard something about a sample tube or something, is there anyway i can get a 19lb sample tube for my 24lb C&L?

 

[mustangramair]

Here's C&L's page for the sample tubes http://www.cnlperformance.com/calibration.html , yes you can get different sample tubes. Running a stock mass air with a bigger throttle body won't hurt your car, just maybe alittle performance.

 

[soontobefastfox]

Yep just get a new calibration tube for 19 lbers. And I would step down to a stock Throttle Body because you are losing some of your bottem end, I don't think enough to notice but for maximum power out of your setup use a stock TB.

 

[legalize420]

Yep just get a new calibration tube for 19 lbers. And I would step down to a stock Throttle Body because you are losing some of your bottem end, I don't think enough to notice but for maximum power out of your setup use a stock TB.

:Word:

 

[luckythirteen13]

the sample tube will be in the $30 range

 

[Paul Perreca]

yea my sample tube was about 25 bucks

 

[loudpedal99]

Edit: nevermind, I read the wrong post

 

[gcwh02]

what did you use to have paul? a 19 calibrated and got the sample tube for the 24's?