? on clutch disk materials

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
? on clutch disc materials

I'm trying to decide between two clutches. Both have a Stage 3 heavy-duty Pressure Plate (3000 lbs clamp load) however one has a Carbotic 6-puck Disc and the other has a 6-puck copper ceramic disc. I tried search but didn't find what I was looking for. I'm assuming I can still use a stock flywheel w/ this clutch since neither manufacturer suggested otherwise. I'm just trying to see which clutch disc material would be a better choice? :shrug: carbotic or copper ceramic?
 
Your best ET suggest you are not making a whole lotta power, unless that has changed (or you plan on a 325 plus hp engine) i would just stay with a stocker. I'm making about 285hp and 317torque and using the autoboys special duralast.
 
darthcual said:
Your best ET suggest you are not making a whole lotta power, unless that has changed (or you plan on a 325 plus hp engine) i would just stay with a stocker. I'm making about 285hp and 317torque and using the autoboys special duralast.


Obviously things have changed. It's no longer a stock 302 w/ exhaust. Stock clutchs are worthless and a complete waste of time if you really drive your car hard. I know people w/ stock 302 totally destroy stock clutches with a few street tire launches.


Can anyone help me out ?