• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

ONE MORE 5 LUG QUESTION

  • Thread starter Thread starter noahsark
  • Start date Start date May 28, 2006
N

noahsark

New Member
Mar 31, 2006
14
0
0
May 28, 2006
#1
  • May 28, 2006
  • #1


http://cgi.ebay.com/ebaymotors/1990-...cmdZVi ewItem

This car has the FRPP 5 lug conversion kit in it and he still has the bullit wheels on it. I thought the FRPP kit had the larger dustcaps and the center caps of the Bullits would not fit? I am going to use these exact wheels only I am going to do 18x9 all the way around with deep dish in the rear.

Can I get away with the FRPP kit with these wheels? I am going to run 275's in the back and 255's in the front. If that kit will work, where is the best place to get the kit?

Sorry to beat a dead horse, but I am trying to get the 5 lug bullits on my car the easiest way I can.

Thanks
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
May 29, 2006
#2
  • May 29, 2006
  • #2
That link doesnt work, if it is the Cobra M-2300-K Brake kit, it is SN95 Components and Bullitts will bolt right up!
 
N

noahsark

New Member
Mar 31, 2006
14
0
0
May 29, 2006
#3
  • May 29, 2006
  • #3
Here are some pics

Sorry,

Here are some pics. The FRPP kit as I understand it does not have the SN-95 hub, thats why I am curious if they will fit.
 

Attachments

  • 18 bullit.webp
    24.3 KB · Views: 237
  • black bullit 18.webp
    25.2 KB · Views: 183

FoxBodyGT

New Member
Dec 18, 2002
71
0
0
Austintown, Ohio 44515
May 29, 2006
#4
  • May 29, 2006
  • #4
If I remember right, there are a couple of "FRPP" kits--one with the rear axles/drums and different front rotors and the good one which is the 2300-K kit which is 5 lug with SN95 setup.

There is a great price difference, too. The top of the line M-2300-K kit is about 1900 IIRC and the other one is a lot cheaper.

I have seen people use bullitts with just the rotor setup and good use of a dremel.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
May 29, 2006
#5
  • May 29, 2006
  • #5
Those wheels will go right on however the center cap of the wheel doesn't go on because of the height of the hub of the Lincoln/SVO rotor. There are a few ways around it one being longer studs and spacers (if u go this route you have to constantly check your lugs for tightness, just to be safe). I have also seen poeple grind them down. If you are wanting the easiest way with out going all wheel disc brakes, imo, just get the FRPP rear axles or get them from a Ranger and swap out the front spindles off a 94-95. Its an easy job. here are some links http://www.stangnet.com/tech/lug.html http://mjbobbitt.home.comcast.net/mustang/5lug.html
 
N

noahsark

New Member
Mar 31, 2006
14
0
0
May 29, 2006
#6
  • May 29, 2006
  • #6
Worst Case

If I grind the dust caps down with a dremel or something, whats the worst that can happen? Anybody done this with some success? This is my last comment on this topic, I promise.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
May 29, 2006
#7
  • May 29, 2006
  • #7
noahsark said:
If I grind the dust caps down with a dremel or something, whats the worst that can happen? Anybody done this with some success? This is my last comment on this topic, I promise.
Click to expand...


Well if you grind down the snout of the rotor the best case is that it will work and the worst case is you overheat the metal and make it brittle causing your wheel to fall off while you drive.


I'm against any modifications to the front brakes in order to fit wheels. If you can't do it right don't do it at all.
 
N

noahsark

New Member
Mar 31, 2006
14
0
0
May 29, 2006
#8
  • May 29, 2006
  • #8
Well it doesnt get much worse than that worse case scernario.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,361
211
114
Ohio
May 30, 2006
#9
  • May 30, 2006
  • #9
Mustang5L5 said:
Well if you grind down the snout of the rotor the best case is that it will work and the worst case is you overheat the metal and make it brittle causing your wheel to fall off while you drive.


I'm against any modifications to the front brakes in order to fit wheels. If you can't do it right don't do it at all.
Click to expand...

I will 2nd that!!!
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
May 31, 2006
#10
  • May 31, 2006
  • #10
will the FR500 wheels 17X9 fit on a fox body with 5 lug conversion from a 94-95 spindles and ranger rear axles???? I really want to put those wheels on my 91 LX coupe.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
May 31, 2006
#11
  • May 31, 2006
  • #11
yes
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jun 4, 2006
#12
  • Jun 4, 2006
  • #12
Hey Mustang5L5...thanks for the reply, and I must ask................

I have seen you on here many of times, but where is the girl in your avatar from?? Her "friends" are enourmous.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,376
18,123
224
Massachusetts
Jun 4, 2006
#13
  • Jun 4, 2006
  • #13
Denise...from www.sportsbybrooks.com

go to the site and you'll find tons of pics of her and her "assets"
 
You must log in or register to reply here.

Similar threads

S
Brakes 80 Mustang 4.2 rear chassis brake line for 5 lug conversion!
  • StangPowerLSX510
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
188
Fox 5.0 Mustang Tech Aug 9, 2026
limp
Brake pad and rotor upgrade
  • Sparky714
  • Aug 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
634
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 17, 2026
Sparky714
O
SOLD FS: 18" FR500 chrome wheels and Toyo tires
  • optionizerSS
  • May 21, 2026
  • Other Classifieds
Replies
1
Views
268
Other Classifieds Jun 2, 2026
optionizerSS
O
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
854
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Wheels-Tires What’s needed to fit a 18x10 wheel in the rear
  • AnthonyA1234
  • Nov 29, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
1K
Fox 5.0 Mustang Tech Dec 5, 2024
Trogdor
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?