• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

One more door question

  • Thread starter Thread starter lparsons
  • Start date Start date Jun 27, 2008
L

lparsons

20+ Year Stangneter
May 24, 2004
198
1
18
Upstate New York
Jun 27, 2008
#1
  • Jun 27, 2008
  • #1
Can I carry a door for an SN95 Mustang in my SN95 mustang? I don't have the dimensions (obviously) but I figure if I roll down the window on the door that I'm carrying, it should fit in the back with my rear seat down, right?



And no, I don't have any larger vehicles available to me. Wife drives a Jetta, which really isn't much better for interior dimensions (though I could steal it if I need to).

Obviously, when I get home I can answer this myself by removing my own door and trying to fit it inside my car. But if someone else has already tried this, I won't have to try it myself. It seems reasonable to me, considering the length of objects that can fit into the back with the rear seat folded down. And I'll be alone in the car, so I could even put it in the entire passenger side of the car if that would work better.
 
L

lparsons

20+ Year Stangneter
May 24, 2004
198
1
18
Upstate New York
Jun 27, 2008
#2
  • Jun 27, 2008
  • #2
So I measured the door (without taking it off) and it came out to about

11 inches deep (excluding the mirror)
33 inches tall (including the corner for the mirror)
54 inches long

I think it should fit, either through the trunk (with seats down of course) or in the passenger seat (with passenger seat all the way forward and reclined all the way back). It will be close, but I think its doable.

I also remembered that the rear seat cushions are easily removed, at which point the rear seat backs fold down and flat. So that will help as well if I go that way. I measured the rear seat -> trunk opening and it should accommodate 11x33, though not with a lot to spare.
 
L

lparsons

20+ Year Stangneter
May 24, 2004
198
1
18
Upstate New York
Jun 28, 2008
#3
  • Jun 28, 2008
  • #3
I just returned from the junkyard.

The answer is yes, we can fit a full SN95 mustang door inside of our SN95 mustangs. I placed it in through the trunk, with the back seats folded down. It fit well in that configuration, with the front passenger seat up and fully usable.
 
You must log in or register to reply here.

Similar threads

S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
187
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
Door wire harnesses 1996 GT
  • Adizzle843
  • Feb 5, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
374
SN95 4.6L Mustang Tech Feb 17, 2026
Adizzle843
G
In expensive ceramic coating
  • gray owl
  • Jul 12, 2026
  • Mustang Sound & Shine All
Replies
6
Views
202
Mustang Sound & Shine All Jul 22, 2026
gray owl
G
Help! Problem with replacment window regulator motor
  • TTSaleen
  • Oct 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
328
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 24, 2025
General karthief
P
Interior and Upholstery Door Speakers- found suggestion to go component, not coaxial
  • pindude80
  • Apr 21, 2025
  • Fox 5.0 Mustang Tech
Replies
13
Views
1K
Fox 5.0 Mustang Tech Apr 28, 2025
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?