one stock and 1 tubular A arm

[dastang2]

hello. i got a car with a tubular k member and only 1 tubular a arm and the other is stock. will this mess up my allignment or anything. it has coilovers. i am swapping this all to my 89

 

[dastang2]

TTT. will it hurt anything

 

[stang8urimport]

Um... just buy a stock a arm or another tubular and be done with it? Most tubular a arms integrate 1 inch more track (they are 1 inch forward then stock).

 

[dastang2]

i would buy another one but they don't sell them by them selves. why swap a tubular k member in the car if i gotta use the stock a arms. no point in that.

 

[stang8urimport]

People use the stock arms if they still want to use the modified McPherson strut setup (stock coil and strut). I'm sure they will sell individually. All you have to do is call................

 

[dastang2]

how much weight would be taken off with just replacing the stock k member but using the stock arms. would i need aftermarket camber plates to use aftermarket a arms and can i just use the tubular k member and still use stock camber plates

 

[stang8urimport]

If you do a coilover you have to have c/c plates.. stock setup, no