online instructions for installing cobra grille insert?

killer5.0

5 Year Member

Oct 8, 2009

725

83

59

Mar 12, 2010

#1

• Mar 12, 2010

• #1

i bought a cobra grille insert and it didn't come with directions nor any way to mount it to the car...anybody know where i can get some online instructions so i can see what to cut and where etc? thanks

 

R

ritter5.0

New Member

Sep 18, 2007

48

0

0

fort drum, ny

Mar 12, 2010

#2

• Mar 12, 2010

• #2

I PLANNED ON GETTING THE COBRA GRILL ALSO AND WAS WONDERING THE SAME THING, SO LET ME KNOW HOW IT TURNS OUT THANKS

 

S

stangbang302

New Member

Jul 13, 2007

180

0

0

fort valley, ga

Mar 12, 2010

#3

• Mar 12, 2010

• #3

i thought it was pretty straight forward, have to do some cutting, little by little so you can get a good fit, and what i did was used rivets.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,179

17,880

224

Massachusetts

Mar 12, 2010

#4

• Mar 12, 2010

• #4

Pretty straight forward really. Cut out the center bar...if something's in the way, trim it out some more. Leave as much of the outside edge as possible. Scuff up the paint a bit and then wipe down with alcohol. Apply with double sided tape. Enjoy your new pony

 

killer5.0

5 Year Member

Oct 8, 2009

725

83

59

Mar 12, 2010

#5

• Mar 12, 2010

• #5

just double side tape huh? maybe i can through a few rivets in it too...thanks just wanted to make sure i didn't cut anything wrong before i do it....still have to get it painted...thanks again

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Mar 12, 2010

#6

• Mar 12, 2010

• #6

Here ya go.
Cervini Cobra Grille Insert - 5.0 Mustang & Super Fords Magazine

 

B

bcmbcmbcm

20+ Year Stangneter

Jan 29, 2003

455

0

16

Oct 17, 2010

#7

• Oct 17, 2010

• #7

Sorry for asking, I searched

Mustang5L5 said:

Pretty straight forward really. Cut out the center bar...if something's in the way, trim it out some more. Leave as much of the outside edge as possible. Scuff up the paint a bit and then wipe down with alcohol. Apply with double sided tape. Enjoy your new pony

Click to expand...

If this has been answered before, my apologies...anyways I want to install a cobra grille insert on an lx, are you saying just cut out the center bar and it should pop in? Are there any alighnment issues? What about the tape? Is there a special bodyshop grade of tape to use?

Lastly, is the 'template' everyone refers to for gt bumpers only?

Thanks and if there is a thread with pics please point the way...

 

U

Uber88GT

New Member

Dec 9, 2009

117

8

0

Edmonton, Alberta

Oct 17, 2010

#8

• Oct 17, 2010

• #8

Here's a pic, rivets on the top and 2 sided tape:

 

TrophyHead

15 Year Member

Mar 18, 2003

1,195

11

49

PA

Oct 17, 2010

#9

• Oct 17, 2010

• #9

Contact cervini and have them send you copy of the template.