Ordering suspension tomorrow (good combo of parts?)

Burtonsnow157 · Jul 8, 2008

I've made a few posts about my suspension that im gunna be buying but im finalizing my purchase tomorrow. I have a 2003 GT, and im going to order my suspension parts from american muscle and stangsuspension. Before i put the order in i just want to make sure all of this stuff is good to go and dont somehow get parts that wont match together (suspension is new to me)

2 Tokico Hp front struts $200
2 Tokico Hp Rear Shocks $110
Ford C Springs $160
~discount - total: $440

Maximum motorsports 4 bolt c/c plates $169

total price $615

Thats the best price i could work up. Does that combination sound good to you guys? The shop by my house wanted $670 plus tax without c/c plates so I'm doing it myself with a friends help

isjoining · Jul 8, 2008

you can get tokico shocks/struts for $269 at brenspeed

Stark77 · Jul 8, 2008

go with the Bullitt handling package and add in a set of C Springs

BennyBlown2v · Jul 8, 2008

isjoining said:
you can get tokico shocks/struts for $269 at brenspeed

+1 www.brenspeed.net

If you were planning on spending $400 on shocks/struts you might as well get bilsteins

Burtonsnow157 · Jul 8, 2008

you can get tokico shocks/struts for $269 at brenspeed

good look man, i knew they had them for 270 somewhere but couldnt remember lol

SaleenGT2001 · Jul 8, 2008

i'd get the H&R race springs. i LOVE mine along with the Tokico HP's

evil281 · Jul 8, 2008

my tokicos are good and i have eibach pro kit, wish i would have gone to h&r, my friend has them and it looks sick, pro kit looks good still and i scrape less than he does tho so its all how low u wana go

Burtonsnow157 · Jul 8, 2008

i scrape less than he does tho so its all how low u wana go

yeah for now i'm gunna do the c springs cause theyre dirt cheap and still decent springs. I have an mrt catted h pipe and it seems like it comes down kinda low. I scrape from time to time with my stock 4x4 suspension so i cant really do a huge drop. i might go with 1.5 but 1.2 on the ford c's seems fine to me

Moco · Jul 8, 2008

Save your cash and don't waste money with CC plates. If your going with C springs, you wont need your CC plates. C springs will not lower the car enough. CC plates are a waste of money on anything with a 1.5in or less drop.

Moco · Jul 9, 2008

Just FYI - GEF Racing has the Bullitt Kit for $456.96 - that's a killer deal!

san~man · Jul 9, 2008

BennyBlown2v said:
If you were planning on spending $400 on shocks/struts you might as well get bilsteins

Bils will cost over that price , but I'd save up for them if I were you.

To the OP: If you're planning to keep the car a while longer, save up more $$ and do it right the first time.

SonicB · Jul 10, 2008

You'll be fine with that set-up.

The MM c/c plates have sperical bearings which is nice. I'll recommend them.

5.4ever · Jul 15, 2008

isjoining said:
you can get tokico shocks/struts for $269 at brenspeed

Direct link? Im also looking into these but cant find them

5.4ever · Jul 15, 2008

Burtonsnow157 said:
I've made a few posts about my suspension that im gunna be buying but im finalizing my purchase tomorrow. I have a 2003 GT, and im going to order my suspension parts from american muscle and stangsuspension. Before i put the order in i just want to make sure all of this stuff is good to go and dont somehow get parts that wont match together (suspension is new to me)

2 Tokico Hp front struts $200
2 Tokico Hp Rear Shocks $110
Ford C Springs $160
~discount - total: $440

Maximum motorsports 4 bolt c/c plates $169

total price $615

Thats the best price i could work up. Does that combination sound good to you guys? The shop by my house wanted $670 plus tax without c/c plates so I'm doing it myself with a friends help

Whered you find the MM plates for $169??

blacksheep-1 · Jul 15, 2008

It seems that almost everybody that lowers their car gets all latherred up about CC plates. They are important under certain circumstances but not as much as you might think, here's the argument:
The CC plates will allow you to align a car that has been lowerred to the extreme, no problem, I think everybody gets that part, this is what they don't get, the alignment takes place on a static alignment machine at a given ride height. Your car rarely travles down the road in that condition, it goes up and down, it bounces, it dives under braking etc. So while the CC plates fix the static alignment problem they don't do too much for the vehicle dynamics.
these will:
Steeda X2 Balljoints - '94-'04 Ford Mustang

Steeda Bumpsteer Kit - '79-'08 Ford Mustang

for the freakin' life of me I can't understand why people play around with CC plates and let the cars roll center and handling go completely to hell.

This is my car running NASA class "D", we were very limited in what we could do to the car since it was a "stock " class, this is a lowered car with otherwise stock suspension.
Tell me, do you see something wrong in this picture? This is one screwed up suspension, just like most other lowerred cars out there.
The bumpsteer kit and taller front ball joint made all the tires stay on the ground and made a huge-massive-explosive-excrement producing difference in the way the car hooked in the corners.

and can some mod resize that photo please.

Ordering suspension tomorrow (good combo of parts?)

Burtonsnow157

Member

isjoining

New Member

Stark77

Member

BennyBlown2v

New Member

Burtonsnow157

Member

SaleenGT2001

Well-Known Member

evil281

New Member

Burtonsnow157

Member

Moco

Member

Moco

Member

san~man

O-G

SonicB

5.4ever

Member

5.4ever

Member

blacksheep-1

Member

Similar threads

Ordering suspension tomorrow (good combo of parts?)

Member

New Member

Member

New Member

Member

Well-Known Member

New Member

Member

Member

Member

O-G

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency