Out of nowhere

xr8d302

I bought a 27" monitor to compensate for my lack o

Apr 29, 2004

1,113

0

36

Medicine Hat, AB

Jun 2, 2006

#1

• Jun 2, 2006

• #1

I come home from my military exercise, hop into my car, it seems to start fine. About 5 minutes after driving, I notice that first gear still feels okay, if not a little weak, but second gear is horrible, it's hesitating and jerking and when I finally brought it up to higher RPM's just to see if I could burn off whatever was making my car run so horribly, it let out a backfire on acceleration. It's like this in 2nd and 3rd gear, I really haven't tried my 4rth gear because I babied the car to my place and didn't do the regular speeds.

Any suggestions on what could have happened? It's killing me, seems this car has a new problem every week, and they're getting worse all the time

 

1TallMF

New Member

Apr 17, 2006

955

1

0

Montreal

Jun 2, 2006

#2

• Jun 2, 2006

• #2

Welcome back dude,
That always sucks when the car runs like crap out of nowhere. Sounds like maybe it developped a vaccume leak after sitting for all of 10 days
Does yours still have the EGR vavle on it? That might have got stuck somehow or started leaking. How does it idle? And does it rev normally in neutral under no load?

 

xr8d302

I bought a 27" monitor to compensate for my lack o

Apr 29, 2004

1,113

0

36

Medicine Hat, AB

Jun 2, 2006

#3

• Jun 2, 2006

• #3

it idle's well and in neutral, it rev's perfectly normal

as well, in first gear, it almost seems fine, it's not until second that i really feel it

 

1TallMF

New Member

Apr 17, 2006

955

1

0

Montreal

Jun 2, 2006

#4

• Jun 2, 2006

• #4

Any codes come up? That probably where I'd start

 

divit250r

Member

Mar 31, 2005

314

0

16

Columbia City, IN

Jun 2, 2006

#5

• Jun 2, 2006

• #5

Check to make sure there's no moisture in the distributor cap? Probably not the problem, but it can't hurt. And it gives you a chance to check for corrosion on the terminals too. Mine sat for the winter and had some ugly crud on the terminals inside the cap, where the rotor fires. Cleaned it off and the idle smoothed out considerably. Just a thought! :SNSign:

Scott

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Jun 2, 2006

#6

• Jun 2, 2006

• #6

pull codes, and then check for moisture in the dist cap......., not much help i know but mine has developed moisture there before, and it sounded as you described


jason

 

94-302-vert

Active Member

Aug 16, 2004

1,947

2

36

NE CT

Jun 2, 2006

#7

• Jun 2, 2006

• #7

look at your batt conections too, mine did EXACTLY this last week and it was jsut my batt connections were loose...

 

xr8d302

I bought a 27" monitor to compensate for my lack o

Apr 29, 2004

1,113

0

36

Medicine Hat, AB

Jun 2, 2006

#8

• Jun 2, 2006

• #8

thanks fella's, I'll go check these things now and see how it goes....let's hope it's simple

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Jun 2, 2006

#9

• Jun 2, 2006

• #9

does it get normal when its warmed up?

 

xr8d302

I bought a 27" monitor to compensate for my lack o

Apr 29, 2004

1,113

0

36

Medicine Hat, AB

Jun 2, 2006

#10

• Jun 2, 2006

• #10

just checked the connections and cap, no problems....i'll have to get the codes read and find out what's what

Edit: stephane, do you know anyone in town who runs codes for cheap or less?

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Jun 2, 2006

#11

• Jun 2, 2006

• #11

If your idle is even a little lumpy, I would run a cylinder balance test while pulling codes. I've had a miss before that was largely unfelt at idle with no load, but as soon as a load was applied, I felt it.
The backfire suggests one cylinder not firing - maybe the CBT can pick it up.

Good luck Aaron.

 

1TallMF

New Member

Apr 17, 2006

955

1

0

Montreal

Jun 2, 2006

#12

• Jun 2, 2006

• #12

xr8d302 said:

just checked the connections and cap, no problems....i'll have to get the codes read and find out what's what

Edit: stephane, do you know anyone in town who runs codes for cheap or less?

Click to expand...

I've got one of those scanners if you want to use it, call me up or something

 

xr8d302

I bought a 27" monitor to compensate for my lack o

Apr 29, 2004

1,113

0

36

Medicine Hat, AB

Jun 3, 2006

#13

• Jun 3, 2006

• #13

1TallMF said:

I've got one of those scanners if you want to use it, call me up or something

Click to expand...

done and done