Time for change has come. I am changing my combo up drastically. All the take-off parts gotta go to clear out the garage. Pictures are posted at the bottom. If you want something or have questions shoot me a message here, or e-mail: stroked87stang@gmail.com or call: (904) 233-6812. All prices are for local pick-up. If it has to be shipped, shipping is extra.
- 31 Spline Strange C-Clip Eliminator Axles. Out of my stock 87 - 8.8 Fox Body $300.
- 31 Spline Moser Spool. 8.8 Ford $140.
- Aerospace Components 8.8 Brake Mounting Plates. $35.
- Probe 13:1 / 347 SBF Pistons. Probe Part # 10480-030. Includes pins and Spiro Locks. Also include the Hellfire rings. The rings can be run again. $250.
- Compucar Nitrous Plate with Solinoids, 175-450 Shot Jets, Original Bottle Mount, 1 Compucar 10# bottle, NOS Bottle Blow-down tube and NOS Purge kit. Ready to bolt on. $400.
- NOS 10# Nitrous Bottle. $100.
- Cold Fusion Bottle Heater and Bottle Heater Cut-off. $50.
- Aeromotive 13201 Carb Fuel Pressure Regulator with AN fittings. $55.
- Earl's Fittings Y-Block. $15.
- Edelbrock 71900 Progressive Nitrous Controller. $325.
- Nitrous Flow Tool. Just put in your fuel jet hook it to the fuel side. This Gauge alone is over $200. The shut-off valve is another $50, plus the braided steel line and fittings. Everything..... $200.
- Autometer 2-1/8" Nitrous Gauge and braided line. $50
- Large 4" Nitrous Bottle Pressure Guage with -6 AN fitting. $60.
- Pro Systems 4150 Carb. Built on a 780 Main body. $575.
- Switch Panel. Includes 4 Carling switched. Made to fit the factory stereo location on a 87-93 Fox body Mustang. $30.
*** SPECIAL *** Will do the Compucar stuff as a kit as pictured below including:
Nitrous plate, fuel and nitrous solinoids, NOS purge kit, 10# Compucar bottle (The bottle is full, that is another $40 bonus included free with the deal), Compucar bottle mounting brackets, 100amp continuous relay, and both -4 AN and -6 AN feed lines. It also includes the jets. $425
- 31 Spline Strange C-Clip Eliminator Axles. Out of my stock 87 - 8.8 Fox Body $300.
- 31 Spline Moser Spool. 8.8 Ford $140.
- Aerospace Components 8.8 Brake Mounting Plates. $35.
- Probe 13:1 / 347 SBF Pistons. Probe Part # 10480-030. Includes pins and Spiro Locks. Also include the Hellfire rings. The rings can be run again. $250.
- Compucar Nitrous Plate with Solinoids, 175-450 Shot Jets, Original Bottle Mount, 1 Compucar 10# bottle, NOS Bottle Blow-down tube and NOS Purge kit. Ready to bolt on. $400.
- NOS 10# Nitrous Bottle. $100.
- Cold Fusion Bottle Heater and Bottle Heater Cut-off. $50.
- Aeromotive 13201 Carb Fuel Pressure Regulator with AN fittings. $55.
- Earl's Fittings Y-Block. $15.
- Edelbrock 71900 Progressive Nitrous Controller. $325.
- Nitrous Flow Tool. Just put in your fuel jet hook it to the fuel side. This Gauge alone is over $200. The shut-off valve is another $50, plus the braided steel line and fittings. Everything..... $200.
- Autometer 2-1/8" Nitrous Gauge and braided line. $50
- Large 4" Nitrous Bottle Pressure Guage with -6 AN fitting. $60.
- Pro Systems 4150 Carb. Built on a 780 Main body. $575.
- Switch Panel. Includes 4 Carling switched. Made to fit the factory stereo location on a 87-93 Fox body Mustang. $30.
*** SPECIAL *** Will do the Compucar stuff as a kit as pictured below including:
Nitrous plate, fuel and nitrous solinoids, NOS purge kit, 10# Compucar bottle (The bottle is full, that is another $40 bonus included free with the deal), Compucar bottle mounting brackets, 100amp continuous relay, and both -4 AN and -6 AN feed lines. It also includes the jets. $425