Passenger side turbo is mounted

1105 · May 17, 2004

Today me and my dad got the passenger side turbo on my car mounted so that side just needs to get the downpipe finished, oil lines ran, and should be good to go. I forgot to put the wastegate actuator on so now I have to go back and modify it to fit which might take a few hours of work. My dad heated up the pipe thats welded to the header and I beat it out a little bit so it would fit over the collector then we welded it on that way. Heres some pictures.

wytstang · May 17, 2004

Thats awsome I wish that was my car having that done

94TURBO5 O · May 17, 2004

That looks so damn nice!
Oh and alot of frigg'n work.

OinkAodeOink · May 17, 2004

"alot fo friggin work"

I bet he's thinking the same...

Nice work man!

Numbles · May 17, 2004

Good luck on finishing the project. Looks good so far. Keep up the good work.

1105 · May 17, 2004

"alot fo friggin work" is friggin right! That was actually fairly easy once we got started, cut the pipe, brought it to the car, cut it again and so on. I just hope it doesnt hit my fender when my car is running.

DougNuts · May 17, 2004

Looks good, I hope you don't have any problems with the head from the turbo being up there. Keep all your wiring out of the way.

How are you running the cold side? Blow through MAF? Intercooler?

1105 · May 17, 2004

I'm going to be running 2 DSM intercoolers, one behind each foglight hole. You can see in the 3rd pic the compressor outlet is pointing down which is where the intercooler will be. From the drivers side, I'll have the outlet pipe come under the radiator over to the pass side, Y pipe the two into a 3" pipe, then onto a Pro-M Bullet MAF then to the TB.

Zero Signal · May 17, 2004

Think you might have any problems with the upper radiator hose touching the exhuast side?

1105 · May 17, 2004

That elbow will be facing down, and I'm going to cut the hose about 2" shorter and pull it tighter.

mytight95 · May 17, 2004

man when you get finished with this, it will be well worth the work i would bet. Everyone here is pulling for you on this one i guarantee you.

jason

BlueOvalStangGT · May 17, 2004

wow, thats really cool. alot more ambitious then what im doing

ARed1995GT · May 17, 2004

he'll find some way to mess his turbo dreams up.... just playin

zenboy99 · May 18, 2004

When its done, that will be one nice satisfying custom mustang you have!

NotQuik · May 18, 2004

Looks sweet man, where are you getting all the plumping for the turbo/intercooler from?

1105 · May 18, 2004

I got all my pipes from Jegs so far, but might be picking up some straight pipes from a local muffler shop. I hope to have the drivers side header done today.

1hot5.0 · May 18, 2004

Looks great.

94TURBO5 O · May 18, 2004

1105 · May 18, 2004

JR, you got too many of thoes smiley faces

94TURBO5 O · May 18, 2004

Passenger side turbo is mounted

1105

I AM the random post master...bow down

wytstang

Mustang Master

94TURBO5 O

New Member

OinkAodeOink

Numbles

Active Member

1105

I AM the random post master...bow down

DougNuts

1105

I AM the random post master...bow down

Zero Signal

Active Member

1105

I AM the random post master...bow down

mytight95

Active Member

BlueOvalStangGT

Active Member

ARed1995GT

New Member

zenboy99

NotQuik

1105

I AM the random post master...bow down

1hot5.0

94TURBO5 O

New Member

1105

I AM the random post master...bow down

94TURBO5 O

New Member

Similar threads

Passenger side turbo is mounted

I AM the random post master...bow down

Mustang Master

New Member

Active Member

I AM the random post master...bow down

I AM the random post master...bow down

Active Member

I AM the random post master...bow down

Active Member

Active Member

New Member

I AM the random post master...bow down

New Member

I AM the random post master...bow down

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency