Passenger Window

[mandkcasey]

It was a nice day in Chicago and I decided to go for a quick drive, when I got home, my 84 mustang passenger window (power) would not roll up. I thought it might be the power window motor so I took the panel off. I have never replaced one before, but the damn thing is basically in the middle of the door. It looks like you have to take the door skin off to replace anything. Is there anyway to bypass the inner frame and get to that stuff without removing the door skin?



Thanks,

 

[kj2833]

there will be some bolts on the inside of the door skin, you will have to remove them and move the whole motor or assembly towards one of the holes in the door. You may have to remove the glass, or simply tape it so it doesnt move around and detach it.

Ive never done one of these cars, but they are all pretty similar. Sometimes it takes an hour or two just to figure out what the hell you are doing, but it just takes patience. If you dont want to figure it out, $50-150 at a local service station will probably do it.