PCV help...???

xkuntrycowboyx

Member

Mar 31, 2005

281

0

17

Marion, Indiana

Dec 16, 2005

#1

• Dec 16, 2005

• #1

i feel like a moron, but could someone post a pic of WHERE IN THE HECK the PCV is on our cars....

I SWEAR IM NOT RETARDED....but i ran out in the cold last weekend for like 5min, and couldn't find it, so i ran back in.

if someone could post a pic so i can get right to it, that would be great...THANKS guys

later..@d@m

 

D

DARK-5.0

Founding Member

Feb 20, 2002

724

1

19

Leawood, KS

Dec 16, 2005

#2

• Dec 16, 2005

• #2

Look at this pic of my oil catch can. The rubber hose on the left goes down to the PCV. Its on the back of the lower intake.



Jeremy

 

Attachments

• DSCN8616.webp

  30.6 KB · Views: 84

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Dec 16, 2005

#3

• Dec 16, 2005

• #3

xkuntrycowboyx said:

i feel like a moron, but could someone post a pic of WHERE IN THE HECK the PCV is on our cars....

I SWEAR IM NOT RETARDED....but i ran out in the cold last weekend for like 5min, and couldn't find it, so i ran back in.

if someone could post a pic so i can get right to it, that would be great...THANKS guys

later..@d@m

Click to expand...

HA HA

I know what you mean!

but

It is there!

Way back & Way down it is located on the lower intake not too far from the top of the bell housing.

Grady

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

34

129

Dec 16, 2005

#4

• Dec 16, 2005

• #4

I access mine from the pass side (as opposed to the fox, where I grab it from the driver side). The guys are right - you gotta dig a little. Grab a good flashlight and scan the top of the lower intake back there - through the nest of hoses and components, you should see it (if you are lucky, LOL).

Good luck.

 

Kevin R.

New Member

Jun 3, 2004

473

0

0

Ohio

Dec 16, 2005

#5

• Dec 16, 2005

• #5

Jeremy, I would like to request info on how you made that oil catch can.

Looks badass.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Dec 16, 2005

#6

• Dec 16, 2005

• #6

Kevin R. said:

Jeremy, I would like to request info on how you made that oil catch can.

Ill be looking as well!

Grady

Click to expand...

 

D

DARK-5.0

Founding Member

Feb 20, 2002

724

1

19

Leawood, KS

Dec 18, 2005

#7

• Dec 18, 2005

• #7

The catch can is from JAZ. I think I paid somewhere around $50 for it. I could have made one for cheaper of course but I just didn't feel like making one. So I bought this one. I haven't been able to run it yet. I bought it for my last motor that had a lot of blow by, but then it blew up and I bought a new shortblock with 700 miles on it, so we'll see how much oil it actually catches.

Jeremy

 

Kevin R.

New Member

Jun 3, 2004

473

0

0

Ohio

Dec 18, 2005

#8

• Dec 18, 2005

• #8

Does JAZ have a websight or anything?

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Dec 18, 2005

#9

• Dec 18, 2005

• #9

here it is