PCV help...???

[xkuntrycowboyx]

i feel like a moron, but could someone post a pic of WHERE IN THE HECK the PCV is on our cars....

I SWEAR IM NOT RETARDED....but i ran out in the cold last weekend for like 5min, and couldn't find it, so i ran back in.

if someone could post a pic so i can get right to it, that would be great...THANKS guys

later..@d@m

 

[DARK-5.0]

Look at this pic of my oil catch can. The rubber hose on the left goes down to the PCV. Its on the back of the lower intake.

Jeremy

 

[final5-0]

i feel like a moron, but could someone post a pic of WHERE IN THE HECK the PCV is on our cars....

I SWEAR IM NOT RETARDED....but i ran out in the cold last weekend for like 5min, and couldn't find it, so i ran back in.

if someone could post a pic so i can get right to it, that would be great...THANKS guys

later..@d@m

HA HA

I know what you mean!

but

It is there!

Way back & Way down it is located on the lower intake not too far from the top of the bell housing.

Grady

 

[HISSIN50]

I access mine from the pass side (as opposed to the fox, where I grab it from the driver side). The guys are right - you gotta dig a little. Grab a good flashlight and scan the top of the lower intake back there - through the nest of hoses and components, you should see it (if you are lucky, LOL).

Good luck.

 

[Kevin R.]

Jeremy, I would like to request info on how you made that oil catch can.

Looks badass.

 

[final5-0]

Jeremy, I would like to request info on how you made that oil catch can.

Ill be looking as well!

Grady

 

[DARK-5.0]

The catch can is from JAZ. I think I paid somewhere around $50 for it. I could have made one for cheaper of course but I just didn't feel like making one. So I bought this one. I haven't been able to run it yet. I bought it for my last motor that had a lot of blow by, but then it blew up and I bought a new shortblock with 700 miles on it, so we'll see how much oil it actually catches.

Jeremy

 

[Kevin R.]

Does JAZ have a websight or anything?

 

[bill302]

here it is