People with m2300 kit, question for ya

Roland69 · Oct 12, 2006

Snikt89GT said:
What dealership will let you test drive a cobra, bullitt, or mach 1 without someone from the dealer going with you??

around here.....alot. I was 17 and test drove a 2000 GT with just me and a buddy. But I did pull up in a 95 so that might have helped.

Snikt89GT · Oct 12, 2006

Roland69 said:
around here.....alot. I was 17 and test drove a 2000 GT with just me and a buddy. But I did pull up in a 95 so that might have helped.

I pulled up in my 05 GT and they wouldn't let me test drive anything without someone. Same results for anyone i've known. Maybe it's just down here?

Mustang5L5 · Oct 12, 2006

I posted this in the other thread, but the Ford Five Hundred and Mercury Montego have 12.5" front brakes and 13" rear brakes on them.

They also have the same bolt pattern as the Mustang

SO maybe they have a 17" spare as well, and maybe Ford just grabbed it from their parts bin meaning Cobra spares come in Five Hundreds???

Not sure though, maybe i'll find a five hundred board and ask an owner to get me the size of the spare, the tire and a Ford part number if possible.

Could be a cheaper alternative if you can find one on Ebay or a boneyard.

Then again, it's a fairly new sedan

Snikt89GT · Oct 12, 2006

What's wrong with just buying a cheap 17" wheel and tire off ebay or something and having a full size spare?

trbkrb · Oct 12, 2006

I haven't heard from my friend with the 06 Mustang to see if the 17" spare will fit, but as soon as I do, I'll find out and probably buy one from MPS if the shipping isn't too bad.

I got a used (slightly curb dented on the inside) Bullitt wheel for $25 locally. With one of my better Goodyears, the full size spare cost me right at $38 mounted and balanced.

ricky50 · Oct 12, 2006

Mustang5L5 said:
99+ GT's have a 16" spare. Unsure if that's the year spread, but my '03 GT has a 16" spare. I have read that it will fit the 13" setup with a small spacer.

Been meaning to test this out because I have 13" brakes on my '03 and hate doing the rear tire swap. However, i don't want to scratch up my painted calipers if it hits

On my fox, i have a 15" V6 spare. It will fit the rear Cobra setup, so i just swap the rear tire to the front. However i hink i'm gonna go 275's in the rear on the fox so i guess iwill either need to get a 17" spare, or figure out if the 16" GT spare will fit with a spacer

I guess we are in the same boat i guess, let me know what you find out please?

stang&2Birds · Oct 12, 2006

ricky50 said:
So if i am not mistaken the spare tire for a 94 + Cobra will fit and anything with a 17" factory rim will fit over them brakes?

Correct. Just do a search for the spare for a 94 Cobra. The site will show all equivalent matches - cool!

Shakerhood · Oct 13, 2006

ricky50 said:
So if i am not mistaken the spare tire for a 94 + Cobra will fit and anything with a 17" factory rim will fit over them brakes?

Correct, a Space Saving Spare from any Cobra, Bullitt, or Mach 1 will clear.

Shakerhood · Oct 13, 2006

Snikt89GT said:
What dealership will let you test drive a cobra, bullitt, or mach 1 without someone from the dealer going with you??

When Mach 1s first came out I walked into my Local Dealership and the Salesman tossed me the keys to a Mach 1 they just got and said "Have Fun"!

Prime Lord · Oct 13, 2006

Snikt89GT said:
What's wrong with just buying a cheap 17" wheel and tire off ebay or something and having a full size spare?

The major downside to that is the space it takes up in the trunk. I mean, its not like these cars have big trunks to start with.

stangjunkie · Oct 13, 2006

me and my old man got to drive the Ford GT around for a bit... tons of fun granted we just finished buying a couple grand in parts from them for my car and the old mans car

People with m2300 kit, question for ya

Roland69

Sergeant Tangnet

Sponsors (?)

Snikt89GT

New Member

Mustang5L5

That is…until I whipped out my Bissell

Snikt89GT

New Member

trbkrb

ricky50

stang&2Birds

Shakerhood

Shakerhood

Prime Lord

Crappy Default Title

stangjunkie

New Member

Similar threads

People with m2300 kit, question for ya

Sergeant Tangnet

Sponsors (?)

New Member

That is…until I whipped out my Bissell

New Member

Crappy Default Title

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency