PIC needed, Keyless entry, please help

heres what i have when i installed my keyless entry in my 95 stang...the item circled in yellow is the antennae wire that hooks into the box. The item circled in white is the wire harness that hooks into the keyless box, where its seen now its just plugged into a holder that holds the plug when not in use, you remove it from this location and plug it into the box. the red circled item is not used if i remember correctly.The black box you see the wire harness circled in white has to be removed and the box is secured to the back.

<a href="http://s43.photobucket.com/albums/e382/bill302/?action=view&current=trunklk.jpg" target="_blank"><img src="http://i43.photobucket.com/albums/e382/bill302/trunklk.jpg" border="0" alt="Photobucket"></a>



this is the keyless box inside the mounting box that you see in my trunk above. This is a view where it mounts on the backside of the box you will have and see in my trunk above..after you plug up the keyless box you will need the proper key fob and direction on how to program it is very easy...

<a href="http://s43.photobucket.com/albums/e382/bill302/?action=view&current=img8675qr2.jpg" target="_blank"><img src="http://i43.photobucket.com/albums/e382/bill302/img8675qr2.jpg" border="0" alt="Photobucket"></a>

Just do what I did, go to a good shop in town and get a keyless entry/alarm installed. It's cheaper than trying to install the stock one, Plus it has a warranty.