• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

pics of my $3 cai

  • Thread starter Thread starter Mr. Rustypwnz
  • Start date Start date Jul 22, 2007
  • 1
  • 2
Next
1 of 2 Next Last

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 22, 2007
#1
  • Jul 22, 2007
  • #1
Here they is!!

painted it flat black, and to my amazement, the tube stays cool, I can go drive it for an hour, doing burnouts and stuff, and it still keeps cool I can put my hand right on it after I drive it.

enjoy.

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

[/URL][/IMG]

Josh
 

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Jul 22, 2007
#2
  • Jul 22, 2007
  • #2
cool..what did you use to make it...pics of it out of car? had to cost more then $3 unless you had most of the stuff to make it.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 22, 2007
#3
  • Jul 22, 2007
  • #3
I just used my existing mac cai, (the part in the fender) and then some more aluminum pipe I had lying around, plus the $3 paint, I scuffed all the pipe up with 80 grit, then shot a couple coats on it, and whalla!! I actaully felt a little power out of this mod, no kidding!! and ive had about every cai known to man, I also have a 70mm maf off of a 94-95gt as well, to keep the flow the same, with a 6" k&n on the end of the meter, no flooding probs either.
 

fastimes69

Founding Member
Jun 27, 2001
188
0
17
San Benito, Texas
Jul 22, 2007
#4
  • Jul 22, 2007
  • #4
Nice work,got a question though.Where could I get an elbow that goes from the air meter to the fender well? I have a filter and plate just need the elbow that runs into the fenderwell. This is from a Moroso CAI. I've tried like Lowes and Home depot for a pvc pipe in that shape but no luck. Any help is appreciated!!
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 22, 2007
#5
  • Jul 22, 2007
  • #5
mine has 3 pieces, if you already have a cai that is non fenderwell mounted, take it off the tb, and put the whole thing into the fenderwell, pull out the plug for the hole in the fender skirt, then put the cai hose clamp through that hole, now all you need to do is, run piping to the tb, youve already made the "fenderwell" part, then lengthen the maf wiring. how I did mine was I just went to the pick n pull and took some different bends of 3" pipe off the ricer honduhz.
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 22, 2007
#6
  • Jul 22, 2007
  • #6
looks ok ..But the stock air box works just as good and its free.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 22, 2007
#7
  • Jul 22, 2007
  • #7
yeh but the stock airbox is stock and it looks like chit lol.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Jul 23, 2007
#8
  • Jul 23, 2007
  • #8
Considering that cold air intake systems provide little or no hp gains, i believe the only reason for replacing them with an aftermarket unit is looks. And in my book that does not look very great at all. You can't match the looks of a Brand name companys product. But as far as craftsman ship goes it looks like you did a pretty swell job on making it. Not dissing your finished product, its just in my book, you can't make a better looking product or even comparable one you buy from a company. but you get what you pay for.
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Jul 23, 2007
#9
  • Jul 23, 2007
  • #9
white99gt said:
looks ok ..But the stock air box works just as good and its free.
Click to expand...
Exactly.

Sooooo.... You think that hackery looks better than a stock airbox????
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 23, 2007
#10
  • Jul 23, 2007
  • #10
slow95gt said:
yeh but the stock airbox is stock and it looks like chit lol.
Click to expand...


Ive run a moroso cai,conical air filter and the stock air box.All made the SAME power..Why spend money if you dont have to..

But hell my STOCK air box is supporting 300rwhp just fine.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Jul 23, 2007
#11
  • Jul 23, 2007
  • #11
I think my stock air box looks just fine.
 

DmnStr8

Member
Apr 16, 2005
0
0
16
NH
Jul 23, 2007
#12
  • Jul 23, 2007
  • #12
You should also remove that breather from the oil fill neck and reconnect it to the intake. There really is no reason to disconnect that in an NA application.
 

white99gt

Founding Member
Aug 8, 2000
4,649
1
0
stockbridge,Ga(near atlanta)
Jul 23, 2007
#13
  • Jul 23, 2007
  • #13
DmnStr8 said:
You should also remove that breather from the oil fill neck and reconnect it to the intake. There really is no reason to disconnect that in an NA application.
Click to expand...
true because its allowing unmetered air into the system.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 23, 2007
#14
  • Jul 23, 2007
  • #14
true because its allowing unmetered air into the system.
Click to expand...

naw its fine, its an exploder tb, so id have to drill it out, its fine believe me!!
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 23, 2007
#15
  • Jul 23, 2007
  • #15
Exactly.

Sooooo.... You think that hackery looks better than a stock airbox????
Click to expand...

whats been hacked? its 2 mac cai's put together.
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Jul 23, 2007
#16
  • Jul 23, 2007
  • #16
You had the part..you made something different...good for you. By the way the stock box can look GREAT if you put the time into making it look great. I run one and it supports over 300to the wheels with a panel filter, but everyone has their own thoughts/wants..so again, good job.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jul 23, 2007
#17
  • Jul 23, 2007
  • #17
he is lying its pvc. j/k it looks alot better in real life.
 
N

niklid05

New Member
Aug 20, 2004
140
0
0
Kutztown PA 19530
Jul 23, 2007
#18
  • Jul 23, 2007
  • #18
slow95gt said:
whats been hacked? its 2 mac cai's put together.
Click to expand...


http://www.macperformance.com/store/product1.cfm?SID=3&Product_ID=185 x 2 = $259 = not $3.
 

blackened88lx

Active Member
Aug 9, 2006
0
4
28
Connecticut
Jul 23, 2007
#19
  • Jul 23, 2007
  • #19
slow95gt said:
whats been hacked? its 2 mac cai's put together.
Click to expand...

It has about 37 couplers of different colors, and 74 mismatched rusty hose clamps facing all different directions. Just looks like butt, sorry. I mean, you accomplished what you were trying to do by making a fenderwell powerpipe style cai out of stuff you had laying around, which is great. But, it did nothing but make it look worse, which is the exact opposite of your intentions.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jul 23, 2007
#20
  • Jul 23, 2007
  • #20
hey I think it looks good, some of you guys just dont like custom stuff I guess?

Quote:
Originally Posted by slow95gt
whats been hacked? its 2 mac cai's put together.


http://www.macperformance.com/store/...Product_ID=185 x 2 = $259 = not $3.
Click to expand...

wrong again!! it was free, I had a friend go to a junkyard one night and totally strip a civic and he took the pipe and then gave it to me, it was wrong lol, but I got lots of free pipe!!! the only thing I paid for was the paint.

again it cost nothing, If you want to make one go find some free 3" aluminum pipe and go for it, you dont have to to summit and spend $300 on pipe, thats a waste of money.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

C
Weird sound from engine
  • charliethepotato
  • Dec 11, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
103
1996 - 2004 SN95 Mustang -General/Talk- Dec 11, 2025
charliethepotato
C
Fox Xtremely high fuel consumption
  • PonyGTrider
  • Apr 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 9 10 11
Replies
213
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 9, 2026
PonyGTrider
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
138
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
415
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 15, 2026
FastDriver
B
Take a look at my rack!
  • bicknell
  • Sep 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
687
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 13, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?