pls help me prepare my car for 9psi kb blower

[stanggt00]

ok guys i am tring to do this the right way preparing my car for the 9psi intercool kb blower

so far i have magnaflow exuast and mac pro-chamber that i am very happy with

no work done to the intake side yet but a k&n filter
i know the blower will replace the upper and lower intake so i am thinking

75mmtb
90mm maf
with the blower on the intake side

i have suspension done so far

subframes
lca
uca
lowering springs

my 60 ft are down to 2.1 or less

i still am working on dr's and welds for the track and deep dish bullitt rims for the street

is there any thing else i should look in to so far as fuel or ignition to get the car rdy..

thxs

 

[DBMSTNG]

ok guys i am tring to do this the right way preparing my car for the 9psi intercool kb blower

so far i have magnaflow exuast and mac pro-chamber that i am very happy with

no work done to the intake side yet but a k&n filter
i know the blower will replace the upper and lower intake so i am thinking

75mmtb
90mm maf
with the blower on the intake side

i have suspension done so far

subframes
lca
uca
lowering springs

my 60 ft are down to 2.1 or less

i still am working on dr's and welds for the track and deep dish bullitt rims for the street

is there any thing else i should look in to so far as fuel or ignition to get the car rdy..

thxs

a MAF should come with the KB kit as well as a new fuel pump setup. you cannot use a 70mm throttle body on the KB. it has an oval shaped opening, not a circle like the stock t/b. some shorty headers will help. you should be considering forged internals. especially if you want to increase boost.

 

[tooblue02]

Actually the KB has a regular t-body opening and my 70 works just fine lthough I would proably go with the 75 (I already had a 70 when I bought my kit) The only other thing you will need is some spark plugs (I have autolight AR-94's and they work great) Everything else is included if you get the upgraded package with the 90 mm maf and switch chip (def a good idea) talk to Ken Christy at KB and e will be able to answer al your questions, he is a very knowlegeble guy. Oh yea you will also need somthing to wide the $hit eating grin off your face after the install, mine still hasn't left after 10K miles