• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Popping noise when engaging the clutch

  • Thread starter Thread starter DARK-5.0
  • Start date Start date Dec 28, 2005
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Dec 28, 2005
#1
  • Dec 28, 2005
  • #1
I haven't had a change to lift the car up and have someone engage the clutch. But whenever I put the clutch in and then release it, about half way on the release it will make 2 quick popping noises. Does anyone know what this could be.

Jeremy
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 28, 2005
#2
  • Dec 28, 2005
  • #2
Jeremy, my old cable did that. It was bothering me so I swapped cables. Some peeps have that noise and they drive like that for years before the cable breaks and some last a week.

I would want to isolate it more first. Make sure the firewall is not flexing (that can make a pop noise) and that the firewall grommet is not making the noise. Also check the mounting bracket in the engine bay to see if the cable sheath is loading and popping the bracket. And so on.

Just my thinking.

Good luck.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Dec 28, 2005
#3
  • Dec 28, 2005
  • #3
it could be the cable as hissing50 stated, but if popping is coming from within flywheel housing it maybe broken or bent pressure plate fingers. i had same problem before and 2 fingers were broken.
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Dec 28, 2005
#4
  • Dec 28, 2005
  • #4
Well its definitely not the flexplate. I just put the motor in and the Spec clutch thats on there only has maybe 1000 miles on it. I'll look into the cable and firewall, but I bet its more than likely the cable. Wheres the best place to get a new clutch cable.

Jeremy
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Dec 28, 2005
#5
  • Dec 28, 2005
  • #5
i got the frpp from johnbleakleyford.com for $75 with quadrant. it doesn't however come with the firewall adjuster, the adjustment is a nut on the end of the cable.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 28, 2005
#6
  • Dec 28, 2005
  • #6
MM has SN95 cables for a decent price as I recall. You might check with Danny to see what he went with and how he liked it (he was going to do all that stuff before Florida decided to see if it could float).
BTW, in case you call anyone about it, you dont have a flexplate (those are used on automatics).
Good luck.
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Dec 29, 2005
#7
  • Dec 29, 2005
  • #7
Haha, when I reread what I wrote the other day I said the exact same thing, I was like wtf. Why did I write flexplate. Must have had a retard moment, I know its a flywheel and pressure plate. I'll call around. Does anyone know if there are other ford cars with the same size cable. I was at the junkyard the other day and there are a ton of thunderbirds and old lincolns and crown vics. Didn't know if I could snag one of those when I got back down there.

Jeremy
 
D

DARK-5.0

Founding Member
Feb 20, 2002
724
1
19
Leawood, KS
Dec 31, 2005
#8
  • Dec 31, 2005
  • #8
Other cars with same length cable????

Jeremy
 
You must log in or register to reply here.

Similar threads

P
Is it normal for all of this to go wrong or did I get played when I bought this ONLY A MONTH AGO.
  • ponygal02
  • Nov 14, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
266
1996 - 2004 SN95 Mustang -General/Talk- Nov 14, 2025
Noobz347
S
1998 Mustang Gt Rattling sound, cannot locate. Video included
  • studerman1
  • Mar 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
229
1996 - 2004 SN95 Mustang -General/Talk- Apr 1, 2026
studerman1
S
G
Electrical Getting good ground in 1991 Fox Vert for amps - getting popping noise when I turn on the lights?
  • gvanginkel403
  • Apr 11, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
435
Fox 5.0 Mustang Tech Tuesday at 11:09 PM
gvanginkel403
G
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
261
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
178
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?