Possible OIL in rad, flowing through coolant..

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#1

• Jul 31, 2006

• #1

hey guys-

Question~ When coolant gets in the oil, symptom of blown H/G-right? But can Oil get into the Radiator/coolant, i mean visibly seen in the radiator with the cap off. is this possible? yet-car runs perfectly-nio other prob's whatsoever....

Ant

p.S. replaced h/g are brand new, Ford racing graphites.

 

Victor's GT

Member

Jul 24, 2006

44

2

7

New Jersey

Jul 31, 2006

#2

• Jul 31, 2006

• #2

Are you sure it's not just thread sealant that was used on the head bolts/studs? Who did the h/g repair?

 

smittyb

Member

Oct 16, 2005

134

1

19

Marysville,wa

Jul 31, 2006

#3

• Jul 31, 2006

• #3

In an Auto car tranny fluid can leak into the coolant if there is a hole in the cooling tube. Very rare though.

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#4

• Jul 31, 2006

• #4

Victor my buddy did the repair,
And smitty my car is an auto.... But that is what my firend stated just before.... Or maybe it could be the 2 bottles of water wetter-I put in there???

Ant

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#5

• Jul 31, 2006

• #5

if it is tranny fluid leaking into the rad-
is there anyway, If thats the case- That i could disconnect the tranny lines into the rad cooler in the rad and run them straight into my external tranny cooler i hooked up? Then it shouldnt leak @ all, and would that really make a huge difference in cooling the fluid down anyhow-eliminataing the in-rad tranny cooler. Oh by the way the rad is a Fluidyne.

please let me know- Thanks Ant

 

Victor's GT

Member

Jul 24, 2006

44

2

7

New Jersey

Jul 31, 2006

#6

• Jul 31, 2006

• #6

what did he use on the studs/bolts that go in the water passage?

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#7

• Jul 31, 2006

• #7

ARP thread sealant.....and he was quite generous with it, and thread lubricant on all bolts as well.

 

Victor's GT

Member

Jul 24, 2006

44

2

7

New Jersey

Jul 31, 2006

#8

• Jul 31, 2006

• #8

monte87 said:

ARP thread sealant.....and he was quite generous with it, and thread lubricant on all bolts as well.

Click to expand...

That thread sealant is black..that could be what your are seeing floating around in the coolant. He didn't use any of that Bar's leak to add to coolant did he?

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#9

• Jul 31, 2006

• #9

Nope-no bars leak, Just ARP sealant, i remember vividly.

 

donsbad68

Immensely Educated

Jan 4, 2003

838

0

0

Oklahoma

Jul 31, 2006

#10

• Jul 31, 2006

• #10

I have this same issue with my new motor, and no matter how much I get out, four passes later there is alittle more oil floating on top. No water in the oil and the car runs great. I just go with it.LOL

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#11

• Jul 31, 2006

• #11

donsbad68 said:

I have this same issue with my new motor, and no matter how much I get out, four passes later there is alittle more oil floating on top. No water in the oil and the car runs great. I just go with it.LOL

Click to expand...

Dude-

Do you have an AOD?
An t

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Jul 31, 2006

#12

• Jul 31, 2006

• #12

well-checked again tonight-

and seen small little ball like oil particles moving around in the rad neck. i pulled the dipstick and oil was clean, Im starting to think its the tranny cooler in the fluidyne rad leaking tranny fluid, not 100% though-Has anyone ever had this problem before???
I mean my H/G are brand new, Ford Racing Graphite H/G's with myabe 500 miles on them, So im highly doubting H/G failure @ this point.

Guys whatta ya think???
Thanks Ant

 

monte87

Founding Member

Feb 26, 2001

876

18

49

new york

Aug 2, 2006

#13

• Aug 2, 2006

• #13

Anyone?