Fair enough. Although, I think once it goes together, it'll be too much of a project to make a cam swap worth tearing it down again. $250-ish gets you a comp cam now, and saves 10+ hours of work later. $350 is a custom cam speced for you. Gosh, it seems like you're perfectly set with everything else. Already got the rockers. Can probably reuse stock pushrods. I would be remiss not to recommend waiting and scrounging that money together.
FWIW, I made ~320rwhp with the Cobra intake and AFR 165s. It dyno'ed at 311rwhp but I never got it dyno'ed it again after porting the lower intake. I figure I might have picked up another 10. The car never got traction for a good pass, but it trapped in the 110mph range before gears, headers, the port, and a tune. Your lighter notch will go faster. Looking forward to seeing you work through it.
FWIW, I made ~320rwhp with the Cobra intake and AFR 165s. It dyno'ed at 311rwhp but I never got it dyno'ed it again after porting the lower intake. I figure I might have picked up another 10. The car never got traction for a good pass, but it trapped in the 110mph range before gears, headers, the port, and a tune. Your lighter notch will go faster. Looking forward to seeing you work through it.