Possibly Best Day Ever....

Fair enough. Although, I think once it goes together, it'll be too much of a project to make a cam swap worth tearing it down again. $250-ish gets you a comp cam now, and saves 10+ hours of work later. $350 is a custom cam speced for you. Gosh, it seems like you're perfectly set with everything else. Already got the rockers. Can probably reuse stock pushrods. I would be remiss not to recommend waiting and scrounging that money together.

FWIW, I made ~320rwhp with the Cobra intake and AFR 165s. It dyno'ed at 311rwhp but I never got it dyno'ed it again after porting the lower intake. I figure I might have picked up another 10. The car never got traction for a good pass, but it trapped in the 110mph range before gears, headers, the port, and a tune. Your lighter notch will go faster. Looking forward to seeing you work through it.
 
Yeah, I totally get your point. This thing came with 30lb injectors too. Not sure if those will be too much. As for the guy wanting out, yeah that was it. He just bought a Porsche and needed space. His loss, my gain.
 
That's absolutely not too much injector. I'm running 30 lbs injectors now on a motor that makes 270rwhp. People get too wrapped up worrying about having too much injector. If 42 lbs injectors will idle fine on a blown 302, they'll idle fine on anything. Anyway, check my "New Hatchback" thread for a video of my car idling perfectly with 30s and less motor than you'll have.
 
Here is the cam in the engine that came with the car. Anyone know what it is?

20170401_155213_zps4uscq07i.webp
 
My first fox was sold with a deadly dangerous 460 in it, no power brakes, no power steering, with 4 cylinder suspension and brakes.

About 6 months after selling it I found the body in Crazy Rays ( a big chain of junkyards in Maryland ).

The first day I brought home that freshly painted red 4 cylinder part of the hatch where the lock was broke off in my hands.The rust and bondo didn't hold....fresh paint didn't help it stay together. Oh...didn't have subframe connectors or a horn, either.

I had a lot of good times with that car....all the times it almost got me killed. I've still got a key to it....but it won't be coming back.

Sometimes I miss sliding through intersections and nosing past turns. The memories of the suspension bottoming out over every slight bump remind me of how stupid I was back then.

That car cought fire one day during a bad rain storm....so the interior had that white powder everywhere. My oldest sons Mom jumped in the back and grabbed him and stood in the down pour while I fogged under the dash. Damn, 16 gauge fuel pump wire. :doh: You had to close your eyes every time you cracked the windows. Lol

You're a very lucky man. You treated it well when you had it and it found its way back home. My car didn't want to come back...unless it came back to kill me.
 
Here is the info on my cam.

I called Comp Cams and here are the specs they gave me. I know very little about cams so please bear with me.

Duration @.50 236 both intake and exhaust

Lift 516 Intake
526 Exhaust

113 Lobe Separation


So, with my stock aod, stock block with afr 165 heads, GT 40 intake, street car only, is this cam useable and practical?

Thank you

Chris
 
I've drains few by pulling the line off the fuel filter that runs to the engine and putting rubber hose and a clamp on it. Ran the hose to a bucket. Jumped the fuel pump relay to ground and power

Those tanks were full...if it isn't full I'd drop the tank and dump it out. To clean it properly it'll need to come out any way. :shrug:
 
  • Like
Reactions: A5literMan