Post Up Pics Of Gt's With Drag Lites!
#12
Mine were Pacer Draglites that came with the tires on them so I am not too sure what size they were but I think they were 15x8, the tire was a 28x10.5x15 but MT's sizes are usually a little smaller. I am not sure what the offset was compared to a Weld Draglite but I didnt have to do any modifications at all, no fender rolling, no hammer, and quadshock's still on there.

 
#16
#18
ya let us know man, I am sure they will fit fine with no problem at all.... Keep the quadshocks if you can, Ford put them there for a reason.
 
#19
Yea im deffinatly hoping I can keep the quads, even with aftermarket control arms, and new shocks I still get some wheel hop and It'll only get worse if I take them off. By chance do you know what kind of lugs I'll have to use if I use my new axles with 3 inch studs? The lugs I have for the drag lites are the style with a shoulder that acctually go into the hole of the rim. So im not sure what to do about new lugs.
 
#20
Alright I'm probly getting a set of draglites tommorrow for my 93 LX, I just have a few questions about them. The fronts are 15x6 with 225 tires not sure of backspacing, and the rears are 15x8 with 265 tires and a 6.5 inch backspacing. I'm sure the fronts will go right on but will the rears? Or will i have to do some fender rolling and adjust quad shocks? Thanks guys.
 
You must log in or register to reply here.

Similar threads

B
Progress Thread 1980 Notch build - autocross w/occasional trips to the drags
Replies
29
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
AeroCoupe
A
Off idle studder
Replies
35
Views
3K
Fox 5.0 Mustang Tech
a1machinista1
A
My 93 4v Fox
Replies
19
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
mattcrp1
M
T
S550 GT 2020 - GT500 20" Wheels
Replies
0
Views
705
2015 - 2023 (S550) Mustang -General/Talk
TwisterS550GT
T
Nice Sn95. 100k miles. Heirloom. Garage kept. We need some help
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
90sickfox
Menu
Log in
Register