post your 1/8 mile times.

[DougNuts]

9.01 @ 77.8 mph 2.0 60ft

ASP pullies, 3.73s w/ auburn pro, MAC headers & off road H, 2 chamber flows

heavy convertable.

 

[blown93feature]

60'-1.70
[email protected]
h,c,i+A-trim w/7lbs of boost, stock block and internals...
AOD from art/car
3450lbs with me in it...

 

[CManT1914]

9.01 @ 77.8 mph 2.0 60ft

ASP pullies, 3.73s w/ auburn pro, MAC headers & off road H, 2 chamber flows

heavy convertable.

What's the auburn pro? I'm about to have the same setup, (just ordered my MAC O/R H) so I'm hoping for some better times once the track owner starts prepping it right.

 

[95WhiteVenom]

D@&$ I'm Slow

R/T= 1.031 : 60' = 2.051 : 330= 5.980 : 1/8= 9.199 : MPH= 76.12
at the time just had 3.55's,borla XR-1 dumps,Mac Pro-chamber,K&N,horrible pilot sport tires its also the night my coil went nuts too. Any one with Michelin pilot sports they only hook when cold cause they are sloppy when warm. Do one burnout in the box for like 5 seconds (2nd gear pref.) to get crap of tires then never do again through the rest of your runs.

 

[Treview1]

60'= 2.207

1/8= 9.344 @ 76.9 mph


94' GT 5 speed, CAI, 3:55s, Borla Catback.

 

[GTJake]

Hey Jake what was the 60ft on your run?

I think a 1.9.

Jake

 

[4Jenna]

Best [email protected] 60ft-1.61

Last time out 7.29@99 60ft 1.77

 

[mytight95]

8.98, 2.3** sixty, and that was the best

as far as mods, thats with a t-moss intake, 4.10's, STOCK HEADS, full exhaust, and a B-cam...........car was very hot fan quit working........that was the way it was setup, I am hoping for at lest mid 8's now on slicks, high-mid 8's on DR's

 

[YEAHLOH95]

Best [email protected] 60ft-1.61

Last time out 7.29@99 60ft 1.77

dang it !! thats my goal 100mph in the 8th good job .so far my best is 7.5 at 95.5 mph i think the car has more in it, but needs more track time i'm going as soon as i get my rear control arms on !

 

[Joe 5.0]

Has anyone else ran in the 8's with stock H/C/I/Manifolds? From some of these times I feel pretty good with only gear/hpipe/dr's running a 8.90.

 

[DougNuts]

What's the auburn pro?

It's a differential, posi-traction. I believe I got the auburn pro, which is like their level 2 if I remember correctly. I went ahead and had them put a new one in while they were in the rear end.

My motor was also well broken in, I had 186K miles when I ran the 9.0.
Oh, I also had an aluminum driveshaft.