post your naturally aspirated combos of 350+

#3
With the parts in my Signature I'm running 423 bhp / 422tq as per the VirtualEngine2000 and 387 bhp and 390tq as per the MEB (Mustang Engine Builder) dyno *note: MEB did not list my specific parts so I chose the closest spec one listed*. Of course these are only computer programs so far, I still have to find a real dyno and do it right. :)
 
#4
:lol: He's means real actual dyno #'s, not internet dyno's. Your car as it sits is maybe a 290-305rwhp combo and 360ish at the fly..

Streetdreams, you talking about rear wheel #'s or flywheel #'s?
 
#6
302, AFR 165's 58cc, 1.6 rockers, FTI cam 218/[email protected] 109ls, .528/.534 (from memory, maybe off a little on specs) performer RPM, 30# injectors, 70mm tb, 76mm maf, 1 5/8 un-eaqual length shorties w/ 2 1/2 exhaust, no cats, 2 chambers. Through a 5sp untuned it made 303rwhp,332rwt and ran 108.8 in the 1/4 (only 5 passes on combo, didnt really learn it).
 
#10
Alright, I finally found a dyno in Maryland! :cool: The place is called "Maint Street Speed & Sound" and it's in Damascus Maryland, a little over 100 miles from me. I'll give them a call next week and see when I can schedule a tuning session. :nice:

This will be really cool cause I spent last Fall getting a major sunburn finishing all those mods. I'll be crossing my fingers!
 
#12
thompsonsd said:
Alright, I finally found a dyno in Maryland! :cool: The place is called "Maint Street Speed & Sound" and it's in Damascus Maryland, a little over 100 miles from me. I'll give them a call next week and see when I can schedule a tuning session. :nice:

This will be really cool cause I spent last Fall getting a major sunburn finishing all those mods. I'll be crossing my fingers!
Click to expand...

I don't know what the name of the dyno they use is, but contact Justin at JPC racing, and he should be able to help you find one thats alot closer to you than 100 miles. I live in Northern Virginia, and its only 70 miles to his place. To contact him check out www.jpcracing.com
 
#13
5.0 HOtrain said:
302, AFR 165's 58cc, 1.6 rockers, FTI cam 218/[email protected] 109ls, .528/.534 (from memory, maybe off a little on specs) performer RPM, 30# injectors, 70mm tb, 76mm maf, 1 5/8 un-eaqual length shorties w/ 2 1/2 exhaust, no cats, 2 chambers. Through a 5sp untuned it made 303rwhp,332rwt and ran 108.8 in the 1/4 (only 5 passes on combo, didnt really learn it).
Click to expand...

What was your time, and what kind of power did you put to the ground?
 
#15
DSS Pro Bullet 331 Short Block
AFR 165 Heads, 58cc
Zex "Dry" Nitrous Kit, 125 Shot
Crane PowerMax Cam (F-303 Style Grind)
Holley SysteMax II Intake
C&L 76mm Mass Air
70mm Throttle Body
30 lbs. Injectors
MSD Digital 6 Ignition System
MAC Longtube Headers
MAC ProChamber H-Pipe
MAC ProDumps Exhaust
BBK Cold Air Induction
Ford Performace Parts 3.73 Gears
BBK Subframe Connectors
KYB AGX Adjustable Shocks and Struts
Eibach Pro-Kit Springs (Front)
Ford Racing "B" Springs (Rear)
UPR Upper and Lower Control Arms
Ford Racing Front Control Arms
Ford Racing 31-Spline 5 Lug Axle
Aerospace Components 4-Piston Disc Brakes
 
You must log in or register to reply here.

Similar threads

P
rear Impact absorbers.
Replies
2
Views
151
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Praetorious
P
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
Replies
21
Views
1K
Fox 5.0 Mustang Tech
slow84lx
S
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
Replies
2
Views
321
SVT Tech Forum
nickyb
nickyb
D
Engine Coolant and Radio Issues
Replies
17
Views
650
Fox 5.0 Mustang Tech
Don7Up
D
Mcmahst
Engine An engine building combo with stock Speed Density (SD) system
Replies
11
Views
951
Fox 5.0 Mustang Tech
Mcmahst
Mcmahst
Top Bottom
Back
Forums
Menu