Looks good but why do it 2 times?
It looks better, but wouldn;t that make it harder in the long run cause when you get it to piqua or w/e you'll have to sand all the crap you just put on it and waste more time. The way that car sat for awhile a month wouldn't make a huge difference.
the sand blaster makes quick quick work of any paint or primer
the sand blaster makes quick quick work of any paint or primer
It also tears the **** out of rust and bondo if you used any.. I would of honestly patched the whole thing up then primered it. Im in the middle of mine and primer and paint is expensive stuff. Im getting ready to shoot the 2k primer this week.. I already have the car sealed but the 2k is the final primer before my paint. My paint is close to 400 a gallon so i want my body work to be good.
dont use sand in the blaster. sand builds up too much friction and heat and warps the metal. for thin sheet metal use either ground up walnut shell media or plastic media. just a little fyi
You dont know how excited i am to see it when its done.
Is the hood already painted?
What kind of paint are you using on your rear bumper...? I just used regular paint and it all split apart into sections and flakes when some kid sat on my trunk and put his feet on my bumper...that plastic's way too **** soft.
Driving without a license?
Pull the VSS out of the tranny and verify that the teeth of the speedo gear aren't stripped. If that's kosher, reach up under the dash and pull the cable from the cluster, and verify that turning the cable on that end will make the other end turn, as well - that will tell you whether or not the cable, itself, is snapped. If that's all good, then plug the cable back into the speedo and make sure that it seats ALL the way into the cluster - it'll go in a bit at first and stop, and I've always had to spin the other end of the cable around a bit until the squared cable end will line up with its squared hole in the cluster before it'll pop in that last 1/4" or so into the gauge cluster.
Eh, i've never had a speedo on my coupe
BS man 3 over??? The least you'll get pulled over for here is 10 over and our cops are pretty damn bored. I don't think it is even good ethics anywhere for a cop to pull someone over for 3 over, there has to be a buffer zone for speedos not being dead on and other little dumb reasons
took it from a drive tonight...pulled out of the drive way and i have no speedo...i think the cable broke or poped off.
all they do is give you a warning...if you dont belive me drive by a cop doing 38 in a 35 and see if he dont pull you over just to tell you to watch your speed...if you get officer Cook....goodluck.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?