Primed the stang today...*~(pics)~*

ryan218

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
#1
primed it today...

in 3 or 4 weeks...not 100% sure when ill get the chance the real body work is going to start ....making patch panels and such......

but for now to protect it from the elements it got primed...

in a hour ill go out and un mask it and get it put back together...

88mustangbodywork055.webp

88mustangbodywork057.webp

88mustangbodywork058.webp

88mustangbodywork059.webp

88mustangbodywork060.webp

88mustangbodywork061.webp

88mustangbodywork062.webp

88mustangbodywork076.webp

88mustangbodywork064.webp
 

Attachments

  • 88mustangbodywork055.webp
    88mustangbodywork055.webp
    62.2 KB · Views: 89
  • 88mustangbodywork057.webp
    88mustangbodywork057.webp
    42.7 KB · Views: 94
  • 88mustangbodywork058.webp
    88mustangbodywork058.webp
    42.6 KB · Views: 95
  • 88mustangbodywork059.webp
    88mustangbodywork059.webp
    47.1 KB · Views: 93
  • 88mustangbodywork060.webp
    88mustangbodywork060.webp
    29.3 KB · Views: 96
  • 88mustangbodywork061.webp
    88mustangbodywork061.webp
    31.8 KB · Views: 94
  • 88mustangbodywork062.webp
    88mustangbodywork062.webp
    43.9 KB · Views: 98
  • 88mustangbodywork076.webp
    88mustangbodywork076.webp
    12.6 KB · Views: 97
  • 88mustangbodywork064.webp
    88mustangbodywork064.webp
    9.1 KB · Views: 83
#7
TAKE OFF ALL THE TRIM!!! Take the lock cylinders, door handles, mirrors, antenna base, and the molding by the windows. The all have to come off. The finished product looks way better than taping everything off.
 
#10
You dont know how excited i am to see it when its done.
Is the hood already painted?

What kind of paint are you using on your rear bumper...? I just used regular paint and it all split apart into sections and flakes when some kid sat on my trunk and put his feet on my bumper...that plastic's way too **** soft.
 
#11
FYI, the trim along the bottom of the window comes off with one phillips head screw per side. Open the door and look at the inside edge of the door, you'll find a short little screw going straight up into the underside. Remove that, and you can slide the trim straight back off. Sand the edge you formed with that primer and finish spraying. You'll be glad you did in the end. :nice:

It looks like some rust holes are still there on the passenger-rear fender lip - is that a photo illusion, or do you have rust-through there, and if so, are you planning to patch it? :shrug:
 
#12
93FiveO said:
Nice,I bet it makes you feel good about getting all primed.One question tho, why do you have the hood masked off like that??
Click to expand...

because for now im not priming the hood,front bumper because the hood is protected from the elements so there no need to...

the whole car will be brought down to bare metal where need again in a month or so.

carbed87 said:
sweet ryan, keep it up man
Click to expand...

thanks..

MAC'n89Blckstng said:
TAKE OFF ALL THE TRIM!!! Take the lock cylinders, door handles, mirrors, antenna base, and the molding by the windows. The all have to come off. The finished product looks way better than taping everything off.
Click to expand...

i plan to..like ive said about 90 times......

this is just temporary...to protect it from the elements because it sits outside...this was to get the rust gone so that it would rust no further and too see what im working with...im not painting it in my garage.....were taking it back to piqua where we will have a few extra guys help us with it because i dont have a welder at my house...

all trim everything like that will be taken off and then it will be sanded back down patch panel's welded in and then back into a primer and then finishing body work then paint...




RYC CUKR said:
Progress is good. :nice:
Click to expand...

very good

25thmustang said:
Nice, what color is it getting painted, the same Blue? Always nice to see projects come together!
Click to expand...

factory

Turkey Sammich said:
It's really starting to come along. :nice:
Click to expand...

yup

slow95gt said:
true, but to each his own...... looks good keep er up!!!!
Click to expand...

?

~FrankenStang~ said:
Lookin' good, Ryan. :nice:
Click to expand...

thanks

foxmustangman said:
You dont know how excited i am to see it when its done.
Is the hood already painted?

What kind of paint are you using on your rear bumper...? I just used regular paint and it all split apart into sections and flakes when some kid sat on my trunk and put his feet on my bumper...that plastic's way too **** soft.
Click to expand...

yeah hood and front bumper are painted but ill be sanding them down and painting them again anyway because there faded and such...

the drivers door was also left alone..its rusted far beyond repair and I'm having a hard time finding a door that is within an hour or so from me..

i think there some additive you got to add to the paint...Ive never had to mix paint before so i don't know...Todd or my dad always mixed the paint for me and I sprayed it...ill ask him next time i talk to him..


but i know there is something that different that allows it to flex..
 
#14
Darkwriter77 said:
FYI, the trim along the bottom of the window comes off with one phillips head screw per side. Open the door and look at the inside edge of the door, you'll find a short little screw going straight up into the underside. Remove that, and you can slide the trim straight back off. Sand the edge you formed with that primer and finish spraying. You'll be glad you did in the end. :nice:

It looks like some rust holes are still there on the passenger-rear fender lip - is that a photo illusion, or do you have rust-through there, and if so, are you planning to patch it? :shrug:
Click to expand...



read above...this is temporary just to get what rust is there off and covered up so it dont rust anymore....

it will be taken to BARE METAL WHERE NEEDED and back in primer in which ALL TRIM, HANDLES, HARDWARE, GAS TANK DOOR, BUMPER, FRONT BUMPER, FENDERS, WILL ALL BE TAKEN OFF AND THEN BACK TO BARE METAK BONDO ECT PRIMED, SANDED PAINTED AND THEN CLEARED


and yes i know how easy the time comes off.

yes all the rusted sections are still there they were just sanded down,,,grind ed and then i took a wire wheel to knock of the rest of the rust and then primed....i dont have a welder here so that will be done in piqua...yes fender lip same way..yeah im gonna patch it...think i would try and cut Conner's after this long? patch panel will be welded in
 
#17
me too

88mustangbodywork085.webp

88mustangbodywork092.webp

88mustangbodywork092.webp

88mustangbodywork097.webp

88mustangbodywork095.webp

88mustangbodywork078.webp

88mustangbodywork082.webp

88mustangbodywork077.webp
 

Attachments

  • 88mustangbodywork085.webp
    88mustangbodywork085.webp
    78.9 KB · Views: 87
  • 88mustangbodywork092.webp
    88mustangbodywork092.webp
    86.3 KB · Views: 89
  • 88mustangbodywork092.webp
    88mustangbodywork092.webp
    86.3 KB · Views: 85
  • 88mustangbodywork095.webp
    88mustangbodywork095.webp
    62.9 KB · Views: 88
  • 88mustangbodywork097.webp
    88mustangbodywork097.webp
    85.6 KB · Views: 90
  • 88mustangbodywork078.webp
    88mustangbodywork078.webp
    75.2 KB · Views: 92
  • 88mustangbodywork082.webp
    88mustangbodywork082.webp
    42.7 KB · Views: 99
  • 88mustangbodywork077.webp
    88mustangbodywork077.webp
    119.6 KB · Views: 83
You must log in or register to reply here.

Similar threads

Mustang5L5
Tips for WUE and ASE tuning
Replies
1
Views
473
Digital Self-tuning Forum
gkomo
gkomo
B
'03 GT Fuel Pump/Pressure/Delivery Issue
Replies
8
Views
818
SN95 4.6L Mustang Tech
gkomo
gkomo
S
Need help asap
Replies
2
Views
239
1996 - 2004 SN95 Mustang -General/Talk-
shaggyman65
S
0
V6 to V8 Swap info
Replies
0
Views
576
1996 - 2004 SN95 Mustang -General/Talk-
02_2v_Curtis
0
M
Progress Thread mkk50's Progress Thread
Replies
19
Views
675
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Noobz347
Noobz347
Top Bottom
Back
Forums
Menu