Pro Chamber Install

[Bluffing024]

Hey guys, I was wondering if anyone around the Everett, WA area would be willing to help me to the install on this thing. I don't have a place or the tools to do it so I would be willing to pay someone to help me with a place and the tools and knowledge to do it. Thanks for anyone that will help a fellow stanger out..:SNSign:

 

[98V6 K.I.T.T.]

If you need a hand I could possibly help you out, I'll probably be installing one of these in the near future. It's a pretty straight forward install, however the passenger side bolts seem to be the difficult spot.

 

[Bluffing024]

If you need a hand I could possibly help you out, I'll probably be installing one of these in the near future. It's a pretty straight forward install, however the passenger side bolts seem to be the difficult spot.

That would be awesome! Thanks man. Do you have a place to do it and the tools needed? It would be nice to just hang out with another stang guy for a change. Thanks again!

 

[SMOKEDYA]

If i were closer to you i'd be willing to help. peace


john

 

[98V6 K.I.T.T.]

That would be awesome! Thanks man. Do you have a place to do it and the tools needed? It would be nice to just hang out with another stang guy for a change. Thanks again!

I have a garage and an undercover car port, despite the temperature from the cold weather it's pretty adequate. I may not have all the tools needed, but it's mostly just swivel attachments that I don't have (the passenger header bolts are rather tight). I however could probably get a buddy (who's on this board) to come by and help out...which he has installed mid pipes before and probably has more tools then me. Let me know and we can try and work something out.