Pro Comp roller rockers. You want to read this

[1987stangman]

Ok, so I got a used semi used set of aluminum pro-comp roller rockers a while back on a trade. I was planning on using them in a low buck 5.0L for a 4 banger conversion I started. I called Pro Comp and asked them if they could send me an instruction sheet for installation since they did not have it avalible online and they told me that do not give out instructions with their product that they expect to take the product to a licensed pro for installation. I told him I never heard of this and that every other set of rockers or even heads had some paper work come with it. Now I know why I found so much negitive information on Pro Comp on the net and this is most likley why their products are so cheap.

 

[bubba-dough]

I don't remember my FRPP or my Cranes coming with instructions. Pro Comp usually has great customer service, but there rockers aren't good.

 

[347HO]

I don't understand why instructions are needed to install roller rockers???

 

[strtrcr50]

My Harland Sharp TW specific rockers did not come with any documentation.

 

[Cobra912]

My Harland Sharp TW specific rockers did not come with any documentation.

neither did mine but consider it a good thing.......I think I've seen many a thread about pro-form rockers breaking in half

 

[95Vert383AOD]

Lookie....I used my Pro Comp Shaft Rockers to create a nifty mechanical ignition lever.

Now hopefully they wont fail at this Job!!!

I also have a shaft rocker on my Key Chain.

I now use probe shaft rockers....Not an issue since!!!

 

[1987stangman]

Lookie....I used my Pro Comp Shaft Rockers to create a nifty mechanical ignition lever.

Now hopefully they wont fail at this Job!!!

I also have a shaft rocker on my Key Chain.

I now use probe shaft rockers....Not an issue since!!!

I have a set of comp cams that did, but the reason is that I am just a paperwork junkie.