Pro flow same as Pro M

Thanks guys I read some similar information. I also read something about pro flow tied in with pro m but haven't found out anything forsure. In the tweecer software start guide (calcon/caledit) it makes reference to proflow and how easy it is to find maf transfers for them. I'm having a hard time finding almost anything on them.

The maf I have is an 80 mm draw through pro flow. It's calb for 42's and off a lighting as stated above. I know obvious it is going to be calib. different then say a fox maf or our maf but I am having a hard time finding info.

I talked to a tuner and he says to set my injector scalars to match the 42's and use a stock maf transfer and increase it by 75%. Sound like this is a way to go?

Thanks again

I was thinking the same thing. I think it's worth a try. If not ill go with what the tuner said but seems like the pro m would be a better starting point to me