• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

probably a stupid question

  • Thread starter Thread starter 95Mustang302
  • Start date Start date Apr 5, 2006
9

95Mustang302

Member
Mar 30, 2005
302
0
16
Apr 5, 2006
#1
  • Apr 5, 2006
  • #1
Ok, i have a 95 mustang thats getting the trickflow h/c/i, and a fox tb conversion in the process. I want to try and keep the egr system hooked up for now, but I need to know where the stock fox egr hooks up to get the exhaust gasses from, and where I can get the tube. I know on the 95 it got the gasses from the passenger side header.

If anyone can help that would be great...

Derek
 

wild86stang

New Member
Oct 12, 2005
115
0
0
Milan, OH
Apr 5, 2006
#2
  • Apr 5, 2006
  • #2
I could be completely wrong, but I believe the egr gasses are internally plumbed through the intake. Hopefully somebody will confirm or correct me.
 
9

95Mustang302

Member
Mar 30, 2005
302
0
16
Apr 5, 2006
#3
  • Apr 5, 2006
  • #3
then what is the point of the egr valve on the fox?
 

wild86stang

New Member
Oct 12, 2005
115
0
0
Milan, OH
Apr 5, 2006
#4
  • Apr 5, 2006
  • #4
Regulate the flow of exhaust gases into the incoming air. At WOT, no exhaust gases are recirculated. I'm not sure what tube you are asking about, on Fox bodies the exhaust gas is routed through the intake manifold. I am sure of that now. I can't remember off the top of my head what the egr valve gets hooked up to, but you might try searching the tech forum.
 
9

95Mustang302

Member
Mar 30, 2005
302
0
16
Apr 5, 2006
#5
  • Apr 5, 2006
  • #5
the tube that connects to the egr valve itself...
 

wild86stang

New Member
Oct 12, 2005
115
0
0
Milan, OH
Apr 5, 2006
#6
  • Apr 5, 2006
  • #6
lol, why isn't anybody else helping? I'm rebuilding my engine right now, so I can't look at it and I don't have my reference book with me. Hopefully another member can help you with this issue. Good luck Derek!
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 5, 2006
#7
  • Apr 5, 2006
  • #7
Post it, and they will come.

If you are using a different (than the fox stock unit) intake manifold then you can route the egr using what was originally the air pump holes in the back side of the heads. There are a couple of 302 equipped vehicles that used these for egr from the factory, so the pipes can be found in a j/y.
If you are still using the stock cats, removing the functionality of the air pump may promote plugging of the cats. If using aftermarket cats or non at all, then the air passages can be used for egr without serious consequence.

I am pretty sure I have a faq on my site about the egr, and consequences of removing it. I would just post it, but I can't access my site from work.

Good Luck and congrats on the decision to keep the egr

jason
 

65ShelbyClone

Founding Member
Sep 9, 2000
4,675
38
119
Antelope Valley, SoCal
Apr 5, 2006
#8
  • Apr 5, 2006
  • #8
The EGR serves one main function and a secondary beneficial consequence: main is to reduce NOx emissions by lowering combustion temperatures(because exhaust gases cannot burn). This also tends to lower the risk of part-throttle pinging.

On a Fox, the EGR passages are all inside the instake manifold. They get routed through the center of the lower intake to the underside of the upper intake and then into the EGR spacer that is between the TB and upper intake. The valve hangs off the back of the spacer and controls exhaust recirculation from there.

You probably need a Fox upper intake and maybe even an aftermarket SN95 TB elbow if you want to keep the EGR. I'm not sure, though. I've never played with post-'93 cars.
 
You must log in or register to reply here.

Similar threads

9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Engine Catch Can or not?
  • R82148V
  • Mar 4, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
499
Fox 5.0 Mustang Tech Mar 6, 2026
ctandc
C
7
What megasquirt kit to order
  • 74delta
  • Jul 4, 2026
  • Digital Self-tuning Forum
Replies
15
Views
662
Digital Self-tuning Forum Aug 26, 2026
fasterthangas
F
Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
285
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
272
SN95 V6 Mustang Tech May 23, 2026
DPP
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?