Problem in the maybe of install..

V-Viper

New Member

Sep 17, 2003

39

0

0

Jun 10, 2004

#1

• Jun 10, 2004

• #1

I know you all are going to laugh at me but.. I'm in the middle of my underdrive pulley install and ran into a snag.

I removed the 4 bolts from the water pump pulley, and took off the belt but the damn thing won't come off! Same with the crank pulley.

I spent the last half an hour trying to remove it with out breaking the water pump! I noticed a rusted knob sticking out of the middle of the pulley.. I WD-40ed the thing to hell.

Am I missing something here?

Dumb n00b needs help

 

94TURBO5 O

New Member

Mar 14, 2004

2,509

0

0

VA

Jun 10, 2004

#2

• Jun 10, 2004

• #2

If they are stock then you are gonna have to work with them patiently. Just lightly tap around the wp pulley with a hammer and then try to work it off. They are just rusted and pressed on for so long they are like fused toether.

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

Jun 10, 2004

#3

• Jun 10, 2004

• #3

Something like liquid wrench might work better cause I don't think WD 40 works as good to loosen things up.

Later
Grady

 

FastGT94

Member

Nov 20, 2003

300

0

16

NW Burbs, IL

Jun 10, 2004

#4

• Jun 10, 2004

• #4

PB rust penetrant from autozone. Good stuff!!! Just keep tappin with a hammer and it will come loose eventually.

 

V-Viper

New Member

Sep 17, 2003

39

0

0

Jun 10, 2004

#5

• Jun 10, 2004

• #5

Thx alot guys, I geuss I just needed the reinsurance that I wasn't doing something wrong. Wreaged the biggest screwdriver I could find in and pulled down with all I had, poped right out.

 

R

rudeone707

New Member

May 17, 2003

1,829

0

0

Fairfield, Ca

Jun 10, 2004

#6

• Jun 10, 2004

• #6

hmm, mine came off with no problem at all. try and hit it with a rubber mallet.