• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Problem Installing Timing Set

  • Thread starter Thread starter Hoytster
  • Start date Start date Mar 21, 2006

Hoytster

I don't dare do that to my Knob
20+ Year Stangneter
Dec 30, 2002
1,069
700
164
Cornwall, PA
Mar 21, 2006
#1
  • Mar 21, 2006
  • #1
Had a problem installing my timing set today. This was the set that came with my TFS H/C/I kit (dynaroll set). When I opened the set I noticed it has two allen head screws (instructions said to countersink the thrust plate bolt holes and use these screws so they fit below the surface of the plate) and a bronze washer, both which were not on the stock timing set. Confused, I called Trick Flow the next day and they said they had never heard of having to countersink the thrust plate, which made sense since the bronze washer was not hitting the stock bolts on the thrust plate (the reason for countersinking and using the allen head screws). But they made it sound like I still needed to use the bronze washer.

Anyways, I went to put the timing set on today, with the bronze washer, and after torquing the cam sprocket bolt I could not turn the engine over! So I removed the cam sprocket bolt and pulled the set back off. It appeared the bronze washer was too thick and was being squashed between the timing set and the thrust plate. So I took the bronze washer off and installed the timing set without it and the engine turns over just fine. I pulled on the cam sprocket to see if I had any play and I have a VERY slight amount of play (about .004), which should be fine.

I'm just not very confident that I put everything together right, especially since there was nothing in the instructions that said you shouldn't use the bronze washer for certain applications. The only thing I know is I can't use the washer that came with the set because it is just a little to thick and will hold the engine back from turning.

Here are some pics to make what I'm talking about a little clearer (maybe).

Here's the bronze washer included with the set:


Here's the stock timing set with some explanations:
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Mar 21, 2006
#2
  • Mar 21, 2006
  • #2
somebody had the same issue a while back and ended up trashing their engine. i will try to search.
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Mar 21, 2006
#3
  • Mar 21, 2006
  • #3
http://forums.stangnet.com/showthread.php?t=608854&highlight=countersink
 

Hoytster

I don't dare do that to my Knob
20+ Year Stangneter
Dec 30, 2002
1,069
700
164
Cornwall, PA
Mar 21, 2006
#4
  • Mar 21, 2006
  • #4
Damn, that's exactly why I want to get this right before I fire this engine up.

Thankfully I dry fitted everything before I put the timing set on and DIDN'T countersink the thrust plate because I saw I didn't need to do it.

I have a feeling the instructions in the kit are just wrong, and I have everything put together correctly without the bronze bearing. With the bronze bearing I have absolutely NO PLAY but without the bearing I have a good .003-.004.

I know when I did the cam in my 5.0 explorer I didn't have any bushings to use, but that was a different timing set also.
 
J

johny

New Member
Jun 14, 2003
24
0
0
Mar 21, 2006
#5
  • Mar 21, 2006
  • #5
Well god dang. Listin to this. So last saturday I get my timming chain in the mail from Summit. As you know Chris I had the two allen head bolts, and the bronze washer. I had no instructions so I wanted to make sure what the heck those bolts were for. Thats when I came on here and heard that I wasnt the only one. So tonite "tuesday" I go out and install my timming chain. I dry fit everything and double check it all. I had about .001-.002 of cam play. Everything looks good and cam spins over by hand. Rap everything up for the night and check my emails. low and behold I get an email on this. Now Im double guessing myself. After seeing those pics and spending all this money, that doesnt make me happy. I have installed many cams before. Never second guessed myself, now I am. Why does it work on mine just fine but not yours. Am I doing something wrong, are you, are the parts wrong. Its the same freaking cam, block, and thrust plate. lol, I feel safer spending an extra $60 and getting a new timming set. What do we do?
 

Hoytster

I don't dare do that to my Knob
20+ Year Stangneter
Dec 30, 2002
1,069
700
164
Cornwall, PA
Mar 22, 2006
#6
  • Mar 22, 2006
  • #6
Well I called Trick Flow again today and described my problem. The guy talked to a couple other people and basically came back and told me the way I have it installed should be correct. He stated as long as I'm getting the correct endplay then I should be fine. He also said dynaroll was incorrect in telling people to countersink their thrust plate and to NEVER do this.

Wish I would be more confident in that way I have it installed...
 
You must log in or register to reply here.

Similar threads

P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
179
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
147
Off-Topic Hangout Jul 20, 2026
SchwarzStock
Suspension 87 steering wheel slightly wobbles after new Rag joint install
  • R82148V
  • Jun 16, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
1K
Fox 5.0 Mustang Tech Jun 24, 2025
R82148V
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?