• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Problem with spark

  • Thread starter Thread starter Boss 351
  • Start date Start date Jul 24, 2006
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 24, 2006
#1
  • Jul 24, 2006
  • #1
Engine will start fine and run okay but if I give it some gas, it will sort of sputter. There's a misfire in there but I'm not sure if it's the coil or a sensor of some sort that could cause the problem? Normally I'd just change the coil, the plugs are stock Ford replacement and have about 2000 miles on them. The wires are Ford Racing but they are old and the coil wire is God-knows-what but that wouldn't be enough to cause this problem.

I do have IAC problems from time to time but I doubt that could cause the spark to drop.
 
D

DeVus1

Founding Member
Mar 29, 2002
400
2
28
P-Town, Va.
Jul 24, 2006
#2
  • Jul 24, 2006
  • #2
Have you checked to make sure the spark plugs are seated correctly and that one of them isnt burned out?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 24, 2006
#3
  • Jul 24, 2006
  • #3
Does it change when the motor is hot or cold?

It doesnt sound like a spark issue to me, but rather an engine management/sensor issue.

Good luck.
 
B

Boss 351

Here sthhhhhhhheeeve take a picthh of my man flowe
Jul 13, 2003
2,433
23
48
Canada
Jul 25, 2006
#4
  • Jul 25, 2006
  • #4
thanks, I'll run my scantool to see if anything comes up... I wonder if we can just buy a sensor kit, you know a bag with every little stupid sensor the engine has.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 25, 2006
#5
  • Jul 25, 2006
  • #5
There are numerous things that it could be, in addition to sensors (my above-post wasnt worded very well). A sensor kit would be nice, but VERY pricey and not necessary (it's money/time better spent to diagnose rather than toss).

Something like slightly dirty injector(s), a vac leak, etc can also all cause issues.

That's a great idea to start with the scan tool to get codes (I dont think you can get Fox PID's with many of the scantools out there, but I could be wrong).

I'm thinking that JR and the other wise ones will have some good ideas for you.

Good luck.
 
You must log in or register to reply here.

Similar threads

M
Idle problem
  • miser143
  • Oct 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 11, 2026
CAMTWO1070
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
B
Resolved Crank no start after engine swap
  • biggrim
  • Sep 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
101
1996 - 2004 SN95 Mustang -General/Talk- Sep 12, 2026
biggrim
B
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
625
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
8
Electrical Crank-no start ... no spark ... no injector pulse, was it something I did? (redux)
  • 85gtCOBRA
  • Oct 28, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
700
Fox 5.0 Mustang Tech Oct 29, 2025
85gtCOBRA
8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?